Rehau PVC edgebanding 301574-676 provides a PVC edge treatment in the Rehau, Inc. line so panel edges can be finished to match a project rather than leaving raw substrate exposed. The product is identified as edge banding in the Edgebanding category, so it is intended to cover and protect panel edges in cabinet, furniture, or casework construction where a narrow, uniform strip is required. The 15/16X.018 C700206 EMB LAC 600FT description defines a 15/16 inch wide, approximately .018 inch thick PVC band supplied in a 600FT length, so it is sized to cover common 3/4 inch panels with some overhang for trimming while staying thin enough for standard edgebanding equipment. This format lets shops and serious DIY users run longer jobs with consistent material from the same roll, supporting repeatable results across multiple parts.
The 15/16 inch width on this Rehau PVC edge banding gives installers extra material beyond a 3/4 inch panel edge, so trimming equipment can create a precise flush cut without risking shy edges. The .018 inch thickness establishes a thin profile that works with common edgebanding machinery and manual trimmers, so edges can be finished with minimal lip or ridge against the panel face. The 600FT length per product description means one roll can handle a substantial run of doors, drawer fronts, or partitions, so setup time on the edgebander is spread over more parts and edge color remains consistent from the first piece to the last.
This Rehau PVC edgebanding, identified under the Edge Banding product class and Edgebanding category, is suited to jobs using engineered panels where a narrow PVC strip finishes exposed edges. The 15/16 inch width specified in the 15/16X.018 C700206 EMB LAC 600FT description aligns with edging applications on 3/4 inch panels for cabinet cases, shelving, and similar components, because the band can be centered and trimmed back to a flush edge. The .018 inch thickness supports use on doors and drawer fronts where a low-profile edge is preferred, so the transition from face material to banded edge remains subtle. With a 600FT roll length, the same edge material can be applied across a full room of casework or a run of closet or office panels, helping maintain the same edge appearance throughout a project.
The 15/16 inch width of this Rehau PVC edge banding provides usable tolerance during application, which helps installers keep coverage even on slightly out-of-square or minorly chipped panel edges before trimming back to size. The .018 inch thickness means the material adds minimal bulk, so edged parts still fit standard reveals and clearances in cabinet runs, minimizing adjustments to layouts. The 600FT length in a single roll reduces roll changes during edging operations, supporting steady feed and uniform glue application throughout a batch of components. The defined Manufacturer Part # 301574-676 ties every reorder to the same specification, which matters when matching color and gloss level on service replacements or additions to an existing installation. By keeping width, thickness, and length clearly defined in the 15/16X.018 C700206 EMB LAC 600FT description, this product supports predictable setup and repeatable edge quality from job to job.
Rehau PVC edgebanding 301574-676 has a stated width of 15/16 inch in the 15/16X.018 C700206 EMB LAC 600FT description, so it provides trim allowance over typical 3/4 inch panels.
This Rehau PVC edge banding is described as .018 inch thick, giving a thin edge profile that helps finished parts maintain standard clearances and a subtle edge transition.
The SAP description lists 600FT, so one roll provides 600 feet of PVC edgebanding, supporting longer cabinet or casework runs from a single color specification.
Rehau 301574-676 is identified as PVC edgebanding in the Edge Banding product class and Edgebanding category, so it is designed to finish and protect panel edges.
The 15/16 inch width gives slight overhang around a 3/4 inch panel, allowing trimming tools to cut back to a flush, chip-free edge along doors or shelves.
Manufacturer Part 301574-676 uniquely identifies this Rehau PVC edgebanding, so repeat orders match the same width, thickness, and appearance across projects.
This Rehau PVC edgebanding 301574-676 from Wurth Baer Supply combines a 15/16 inch width, .018 inch thickness, and 600FT roll length to support efficient edging of 3/4 inch panel projects. The clearly defined Manufacturer Part # 301574-676 and Edge Banding classification let shops and serious DIY users specify the same PVC banding whenever matching existing work or planning a new cabinet or casework run. Add this Rehau, Inc. PVC edge banding to the project list when a consistent, machine-friendly strip is needed to finish exposed panel edges.
Sold In: 1 Roll