Rehau PVC edgebanding 301574-680 provides a finished edge for panels where a PVC edge banding is specified, giving raw substrate edges a consistent, professional appearance across a run of cabinets or casework. The 15/16 inch width covers typical 3/4 inch panel edges with a small overhang, allowing trimming back to a precise, flush edge line for a clean visual and tactile result. The .018 inch thickness creates a thin, low-profile edge that blends closely with the panel face, which is useful when a subtle, laminate-like edge detail is desired. The C300361 embossed lacquer surface creates a textured, coated finish that aligns with matching decor programs, helping panels and doors present as a coordinated system. A 600FT length supplies continuous material for longer production runs, reducing coil changes during repetitive cabinet or fixture work and supporting consistent results from the first panel to the last.
The 15/16 inch width of this Rehau PVC edgebanding gives edge-banding equipment enough lateral margin to track, trim, and scrape without exposing the substrate, which helps maintain a steady visual line along tall cabinet sides or long shelves. The .018 inch thickness allows trimmers and scrapers to remove overhang with light passes, limiting the amount of material that needs to be machined away at the edge. The C300361 embossed lacquer surface interacts with standard cutting and scraping tools as a coated, textured layer, which supports controlled trimming while maintaining the decorative appearance on the final pass. With 600FT available in a single coil, continuous feeding on an edgebander is supported for longer panel runs, helping the installation sequence flow without frequent coil change interruptions.
This Rehau PVC edgebanding, identified by manufacturer part 301574-680, is suited to panel and cabinet projects calling for PVC edge banding in a C300361 embossed lacquer decor. The 15/16 inch width aligns with common carcass and door constructions based on approximately 3/4 inch substrates, so the material can be applied to cabinet sides, drawer fronts, shelving, and partitions while leaving trim allowance. In woodworking and laminate-focused shops, the .018 inch thickness supports a slim edge detail that parallels many laminate programs, which is useful when building coordinated casework lines. Because the coil length is 600FT, this product aligns well with runs where a single decor is repeated across multiple cabinets, closets, or fixtures, helping maintain color and texture consistency from unit to unit.
The combination of 15/16 inch width and .018 inch thickness in this Rehau PVC edgebanding creates a specific working window for machinery and hand tools, so setup can target a light trim to reach a flush edge without heavy stock removal. The embossed lacquer C300361 surface acts as the finished show face during use, so accurate trimming preserves the decorative coating at the edge while revealing the profile designed by Rehau, Inc. Being PVC edge banding, the material responds predictably to dedicated edgebanders and trimmers that are tuned for synthetic edges, which helps maintain square, chip-free lines along cabinet doors and panels. The 600FT coil length supports planning sequences where panels are processed in batches, allowing installers and shop teams to run all parts for a given decor from the same coil for visual continuity.
Rehau PVC edgebanding 301574-680 is specified at 15/16 inch wide, giving coverage over standard 3/4 inch panel edges with extra material for precise trimming and clean finished lines.
This Rehau PVC edge banding is .018 inch thick, providing a thin edge that machines easily and creates a subtle transition between the panel face and edge.
The C300361 embossed lacquer description identifies a textured, lacquered surface decor on the PVC edgebanding, aligning with matching Rehau programs for coordinated panel and edge appearance.
The Rehau 301574-680 PVC edgebanding coil provides 600FT of material, supporting longer cabinet or panel production runs under a single decor selection.
This Rehau PVC edgebanding suits cabinet, closet, and panel projects that specify 15/16 inch wide, .018 inch thick PVC edging in the C300361 embossed lacquer decor.
The 301574-680 PVC edgebanding is manufactured by Rehau, Inc., aligning with their edge banding systems used in woodworking and panel fabrication.
Choose Rehau PVC edgebanding 301574-680 when a 15/16 inch by .018 inch PVC edge in the C300361 embossed lacquer decor is required across cabinet or panel work. The 600FT coil length supports efficient production and consistent appearance wherever this decor is specified.
Sold In: 1 Roll