Rehau PVC edgebanding 301574-690 provides an edge banding solution identified as PVC, so it works as a dedicated edge treatment rather than exposed board, giving cabinet and casework edges a finished, uniform appearance that matches the intended design line.
The 15/16 inch width noted in the SAP description as 15/16X.018 covers common 3/4 inch panel thickness with overhang, allowing trimming back to a crisp edge and reducing the risk of substrate showing along the front face.
The .018 inch thickness specified in 15/16X.018 creates a slim edge profile, so joints sit close to flush with the surface and help limit the visible step between face material and banded edge on typical cabinet components.
The length defined as 600FT in the description indicates a continuous run, supporting longer production jobs or multiple smaller projects from the same run, which helps maintain consistent color and texture across all finished parts.
The designation C600001 EMB LAC in the SAP description calls out an embossed lacquer surface identification, which describes an edge banding surface prepared with a defined visual and tactile structure that supports a specific decorative program in the shop.
The 15/16 inch width stated as 15/16X.018 gives about 3/16 inch total overhang on 3/4 inch panels, which provides working room for flush trimming tools and reduces the chance of leaving exposed core on face edges.
The .018 inch thickness in the same designation defines how far the band stands off the panel face, which matters when setting up trimming, scraping, or sanding steps so that the final edge line stays straight and controlled.
The 600FT length description delivers one extended run of PVC banding, which suits edgebanders and manual setups that benefit from fewer roll changes during jobs, helping keep feed, heat, and pressure adjustments stable across many parts.
The C600001 EMB LAC surface identification ties this edge banding to a particular embossed lacquer appearance, which lets shops align front edges with specific board programs so the transition between face and edge follows the same design intent.
This Rehau, Inc. product is listed under Edge Banding and Edgebanding categories, which positions it for use on panels and components where exposed composite edges need to be covered to meet design and functional requirements in woodworking projects.
The 15/16 inch by .018 inch format specified as 15/16X.018 works with common cabinet, fixture, and casework parts cut from roughly 3/4 inch stock, giving the extra width needed for trimming while holding a slim profile at doors, drawer fronts, and shelves.
The 600FT length designation supports runs where many parts share the same finished look, so installers can process fronts, ends, and interior components from the same coil of banding and maintain a uniform edge appearance across the job.
The C600001 EMB LAC tag connects this PVC edge banding to an embossed lacquer visual, which supports projects that rely on that particular decorative specification so the edges do not visually break away from the chosen board surface pattern.
The PVC edgebanding material identified in the product name is designed as edge banding, which allows standard edgebanding machinery or manual jigs built for PVC to cut, feed, and trim it in a predictable way across repeated production cycles.
The 15/16 inch width from the 15/16X.018 dimension leaves working margin beyond panel thickness, helping trimming knives and flush routers track along the edge without risking short coverage that could expose substrate on finished cabinet parts.
The .018 inch thickness stated in the description keeps the edge narrow, which can reduce the effort needed for final scraping or sanding and helps maintain crisp corners where doors and panels meet in tight reveals or aligned runs.
The 600FT length in the SAP description provides a single extended coil, limiting changes during runs so feed tension, heating settings, and pressure adjustments on automated or semi-automated edge equipment can remain stable from first part to last.
The C600001 EMB LAC embossed lacquer identification describes a specific surface structure and sheen, allowing the finished edge to follow the same visual program as matching components so doors, drawer fronts, and exposed carcass edges appear coordinated.
Being manufactured by Rehau, Inc. and recorded under the Manufacturer Part # 301574-690 gives a clear, repeatable identifier, supporting reordering the exact same edgebanding when future work calls for matching edges on additional projects or replacements.
Rehau PVC edgebanding 301574-690 is identified as PVC edgebanding, which suits edge banding operations that rely on thermoplastic material for trimming and finishing cabinet or panel edges.
The product description lists 15/16X.018, meaning the edgebanding is 15/16 inch wide and .018 inch thick, sized to cover typical 3/4 inch panels with extra material for trimming.
The SAP description specifies 600FT, so this edge banding provides 600 feet of continuous material, supporting longer runs or multiple projects with consistent appearance.
The C600001 EMB LAC designation identifies an embossed lacquer style surface, aligning the edgebanding with a particular decorative program for visual coordination with panels.
PVC edgebanding 301574-690 is made by Rehau, Inc., providing a defined manufacturer and part number for consistent specification and reordering in shop workflows.
This product is listed under Edge Banding and Edgebanding categories, positioning it for edging cabinet parts, shelving, and similar woodworking components that require covered edges.
The Rehau PVC edgebanding 301574-690 combines a 15/16 inch by .018 inch profile, a 600FT length, and the C600001 EMB LAC embossed lacquer identification, giving shops a clearly defined edge banding option for projects built around that specific decorative program.
With a precise Manufacturer Part # 301574-690 and classification as Edge Banding, it fits workflows that rely on repeatable sourcing so edges on cabinets, fixtures, and casework stay visually consistent from job to job.
Sold In: 1 Roll