Rehau PVC edgebanding 301574-692 15/16 x .018

Rehau PVC Edgebanding 301574-692 For Clean Edges

Rehau PVC edgebanding 301574-692 is a PVC edge banding from Rehau, Inc. that covers and protects raw board edges, giving casework and panels a finished working surface that holds up in day-to-day shop and jobsite use. The 15/16 inch width gives coverage across standard 3/4 inch panel edges with some tolerance for slight panel variation or trimmed glue lines, helping installers get consistent visual results along long cabinet runs. The .018 inch thickness keeps the edge profile slim, which supports tight-looking corners and helps machines trim and buff efficiently in typical edgebanding workflows. This edgebanding is identified by color code C100033, so shops can match it to corresponding board or laminate programs wherever that code is specified. The 600 foot length gives shops and installers extended run time between roll changes, supporting repeatable output on production jobs or larger one-off projects.

Key Rehau PVC Edgebanding Details For Pros

• The 15/16 inch width spans common 3/4 inch panel edges with room for slight overhang, which lets edgebanders trim back to a clean, flush line along cabinet sides, shelves, and door edges.
• The .018 inch thickness keeps the edge profile thin, which helps trimming stations cut and scrape without leaving a heavy radius, supporting a cleaner transition from face to edge on finished parts.
• The PVC material gives this edge banding a consistent, machinable surface, so feed, trimming, and buffing operations can stay predictable from the first foot of the roll to the last.
• The C100033 designation ties this banding to that specific color reference, which matters when fabricators need visual continuity across doors, drawer fronts, and case parts on coordinated jobs.
• The 600 foot roll length supports longer uninterrupted production runs, which reduces changeover time between runs and helps maintain alignment and settings on edgebanding machines.

Installation Fit And Edgebanding Workflow Details

The 15/16 inch Rehau, Inc. PVC edge banding width gives installers enough overhang on 3/4 inch panels for trimming units to track accurately, supporting straight cuts without exposing the core. With a .018 inch thickness, this banding sits light on the edge, so post-trimming scraping and buffing remove minimal material while still leaving a defined, controlled profile. The C100033 identifier gives shops a clear reference when setting up panels and fronts that are coordinated to that code, helping maintain a consistent appearance across all edged parts in a run. Because this edgebanding is supplied in a 600 foot length, it allows extended setup on edgebanders for repetitive cabinet components, supporting steady feed and consistent trimming results across larger batches.

Where This Rehau Edge Banding Fits In Shop Work

Using Rehau PVC Edgebanding On Panel Edges

This Rehau, Inc. PVC edge banding in 15/16 inch width is suited to covering edges on typical 3/4 inch panel stock, giving a slight overhang that trimming heads can reference for a flush finish. The .018 inch thickness supports edging on cabinet sides, shelves, tops, and similar parts where a slimmer edge profile is preferred for a clean, modern line. The C100033 color designation ties directly to that coded finish, which matters in shops that build coordinated cabinet programs or repeat jobs where the same visual match is required from run to run. With 600 feet per roll, this banding supports extended runs of doors or case parts, so once machines are dialed in, operators can hold consistent feed speeds and trimming settings across the job.

Why These Edgebanding Details Support Consistent Results

The combination of 15/16 inch width and .018 inch thickness on this Rehau, Inc. edge banding gives operators a predictable margin for trimming while keeping the finished edge visually light, which helps reduce rework from over-trimming or heavy profiles. The PVC construction provides a uniform material for cutting and scraping, so knives and scrapers work against a consistent surface, supporting stable edge quality and reducing variation along long cabinet runs. The C100033 code serves as a repeatable reference when scheduling jobs, so shops can call out the same banding part number 301574-692 whenever that color program is needed, maintaining continuity across replacements or add-on pieces. The 600 foot length allows this edge banding to stay on the machine for multiple batches, which keeps setup changes to a minimum and supports a smoother workflow across day-to-day cabinet and casework production.

Common Questions About Rehau 301574-692 Edgebanding

Select Rehau PVC Edgebanding 301574-692 For Your Run

This Rehau, Inc. PVC edge banding 301574-692 combines 15/16 inch width, .018 inch thickness, C100033 color designation, and a 600 foot roll length to support efficient cabinet and panel edging. Add this part to cover 3/4 inch panel edges where that specific C100033 finish and a slim PVC profile are required across consistent production runs.