Rehau PVC edgebanding 301574-694 15/16 x .018

Rehau PVC Edgebanding 301574-694 For Clean Panel Edges

Rehau PVC edgebanding 301574-694 is a PVC edge banding from Rehau, Inc. that covers and protects exposed panel edges, giving casework and fixtures a finished look that matches your board setup. The 15/16 inch width spans standard panel thicknesses with a little overhang, so trimming brings the edge flush without starving either face. The .018 inch thickness keeps the edge profile slim while still masking raw substrate, which helps panels read visually as a single surface. The C100185 embossed lacquer finish adds surface texture along with a lacquered top layer, so the edge reflects light more like a cabinet face than a raw plastic strip. The 600 ft length in a single run supports longer jobs or repeat work on the same program without frequent reel changes.

Key Rehau Edgebanding Details That Help On Site

• The 15/16 inch width gives you working tolerance past the panel faces, so you can trim back to a clean line without fighting a narrow strip during routing or scraping.
• The .018 inch thickness keeps the band low-profile, which helps machined corners stay crisp while still covering the core material along cabinet and fixture edges.
• The PVC construction defines the band as a plastic edging, so it works in workflows built around PVC-compatible edgebanders and trimming tools in woodworking shops.
• The C100185 embossed lacquer finish pairs an embossed surface with a lacquer layer, helping edges visually coordinate with finished panel surfaces in a run of casework.
• The 600 ft length is suited to production or multi-cabinet jobs, so one roll can carry a series of components cut from the same program or color family.

Edgeband Size And Finish For Straightforward Application

This Rehau edge banding 301574-694 uses a 15/16 inch by .018 inch profile, giving you enough width for standard panels with a small trimming margin that helps reduce rework at the router. The PVC material behaves consistently under common edgebanding equipment, supporting predictable feed and heat behavior along cabinet parts. Its C100185 embossed lacquer surface presents an embossed, lacquered finish that keeps the visible edge aligned with the finished faces around it. With 600 ft per roll identified in the SAP description, a single run supports batch processing of cabinet parts or fixtures without frequent material changeover.

How This Rehau PVC Edgebanding Fits Your Work

Using 15/16 x .018 PVC Edgebanding On Panels

The 15/16 inch width on this Rehau PVC edgebanding 301574-694 is sized to span the thickness of typical panel stock while leaving slight overhang, which supports clean trimming on both sides of cabinet and casework edges. At .018 inch thick, the band provides an edge that visually covers the substrate without adding a bulky lip, useful when you want doors, drawer fronts, and carcass parts to read as flat. The PVC construction supports workflows centered on plastic edgebanding for shop-built cabinetry and fixtures, helping maintain consistent behavior during banding and trimming operations. The embossed lacquer C100185 finish gives the edge a textured, lacquered appearance that works alongside finished board faces in a coordinated run.

Details That Support Repeatable Edgeband Results

The defined 15/16 inch by .018 inch size on the 301574-694 edgeband provides known dimensions, so machine settings can be dialed in for this profile and reused across jobs. Its PVC makeup means the band responds in a consistent way under typical temperature and pressure ranges used in PVC edgebanding processes, which supports uniform adhesion and trimming behavior on repeated cycles. The C100185 embossed lacquer finish offers a specific surface pattern and lacquer layer, so you can standardize on this appearance across multiple components where the same edge look is required. With a 600 ft roll length called out, the material supports running series production or future reorders under the same manufacturer part number 301574-694.

Practical Questions About Rehau 301574-694 Edgebanding

Select Rehau 301574-694 For Consistent Edge Finishing

Rehau PVC edgebanding 301574-694, identified by SAP description 15/16X.018 C100185 EMB LAC 600FT, pairs a workable 15/16 inch by .018 inch size with a C100185 embossed lacquer finish for coordinated cabinet edges. The PVC construction supports standard PVC edgebanding processes, and the 600 ft length suits runs of casework or fixtures built under the same program. For projects calling for this specific Rehau profile and appearance, choosing this edge banding aligns material, finish, and dimensions under a single part.