Rehau PVC edgebanding 301574-700 is a PVC edge banding from Rehau, Inc. that covers and protects exposed panel edges, so cabinet and furniture projects present a finished edge instead of raw core material. The edge banding belongs to the Edge Banding product class, which means it is designed for use on board edges where a durable edge detail is needed on casework, shelving, or similar components. The SAP description 15/16X.018 C600462 EMB LAC 600FT identifies a 15/16 inch wide, 0.018 inch thick PVC strip that wraps standard panel edges while keeping material buildup low. The 600FT length reference indicates a long continuous run that supports production or multiple jobs without frequent changeovers. The C600462 EMB LAC detail shows it is a specific Rehau embossed lacquer design, so edge appearance and texture stay consistent across all pieces using this code.
The 15/16 inch width on this Rehau PVC edgebanding gives coverage that extends past typical panel thickness, so installers can apply it to 3/4 inch board and trim back to a precise edge. The 0.018 inch thickness described in the SAP line keeps the material thin, which matters when aligning doors and drawer fronts where multiple edges meet. The 600FT length noted in 15/16X.018 C600462 EMB LAC 600FT supports consistent sizing from the same roll, which helps maintain the same reveal along many cabinets or shelves. The specific C600462 EMB LAC code identifies one design and finish within Rehau offerings, so fit and appearance stay the same when the same number is repeated on future runs or replacement pieces.
Rehau PVC Edgebanding, 301574-700 is part of the Edge Banding product class, so its role is covering exposed board edges on cabinets, furniture, and other laminated or composite panels. The 15/16 inch width indicated in the SAP description 15/16X.018 C600462 EMB LAC 600FT suits situations where the panel thickness is near 3/4 inch, allowing a slight overhang on each side that can be trimmed flush after bonding. That width helps create an even, straight edge line on casework, shelving, or similar assemblies. The PVC material named in the product title is suited to woodworking industry environments served by Wurth Baer Supply, where synthetic edgebanding is standard around melamine or laminated cores.
The C600462 EMB LAC portion of the SAP description shows this is a defined embossed lacquer design, giving a specific texture and finish that can be repeated across all panels built with the same reference. That consistency matters when building banks of cabinets or multiple matching pieces, because the same edge code maintains one look across every run. The 600FT length called out in 15/16X.018 C600462 EMB LAC 600FT supports production use, as one roll can edge many parts in sequence, reducing interruptions to reload material. The 0.018 inch thickness works with this workflow by adding only a small build to the panel edge, which supports tight alignment between adjacent doors and drawer fronts where edge thickness affects gaps.
The width and thickness combination in 15/16X.018 C600462 EMB LAC 600FT defines how this Rehau PVC edgebanding behaves in everyday cabinet shop work. The 15/16 inch width gives enough coverage to center on a 3/4 inch panel and still have material to trim, helping achieve a uniform reveal after trimming rather than chasing short edges. The 0.018 inch thickness reduces step at the face when the banding is properly flush-trimmed, which benefits hinge and drawer hardware setting where small variations at the edge can affect clearances.
The specified C600462 EMB LAC design code ties the material to one embossed lacquer appearance, which simplifies reorders when a shop needs additional edge banding that matches previous jobs using this number. That link between part number and finish supports repeatable visual results from one project to the next. The 600FT length referenced in the SAP description also affects workflow, as long runs from the same roll minimize lot mixing and allow entire cabinet runs or room sets to be edged from a single continuous source. Using one length like this supports consistent tension and feeding behavior through edgebanding machines over many parts, which contributes to steady quality along the full run of cabinet components.
Rehau PVC edgebanding 301574-700 is an Edge Banding product that covers and finishes exposed panel edges, so cabinet and furniture parts present a clean edge rather than raw core.
The 15/16X.018 size means the strip is 15/16 inch wide and 0.018 inch thick, giving coverage with trim allowance on 3/4 inch panels while keeping edge buildup thin.
The 600FT length supports edging many cabinet or furniture parts from one roll, which helps maintain consistent appearance and reduces time spent changing to new lengths.
The C600462 EMB LAC code identifies a specific embossed lacquer design within Rehau PVC edgebanding, so using this part number maintains the same edge texture and finish.
This Edge Banding is used on exposed edges of cabinet, furniture, or similar panels, giving a finished PVC edge that aligns with woodworking industry applications.
The 0.018 inch thickness keeps the PVC edge banding relatively thin, which helps maintain tight gaps and smooth transitions between adjacent cabinet doors and drawer fronts.
Rehau PVC edgebanding 301574-700 combines a 15/16 inch width, 0.018 inch thickness, and 600FT length in a defined C600462 EMB LAC design, giving shops a repeatable edge solution tied to one manufacturer part number. Using this specific Edge Banding on cabinet and furniture projects keeps edge sizing and embossed lacquer appearance aligned across every panel that carries this code. For work drawing from Wurth Baer Supply offerings, this Rehau PVC edge banding provides a clearly identified option for covering exposed panel edges with a uniform, coded finish on production or repeat jobs.
Sold In: 1 Roll