Rehau PVC edgebanding 301574-705 is a PVC edge banding from Rehau, Inc. that covers exposed board edges so cabinet and furniture projects present a finished, uniform edge instead of raw substrate. The 15/16 inch width spans common panel thicknesses, giving a bit of overhang to trim flush for a straight, tight line along casework edges. The .018 inch thickness keeps the edge slim, which helps panels retain their original visual proportions while still masking the core. The C600503 reference identifies the specific decor, so matching existing runs of the same code stays straightforward on repeat work. The embossed lacquer surface described in the C600503 EMB LAC marking provides a textured, coated face that is designed to visually coordinate with corresponding board or laminate. A 600 ft length on a single run reduces changeovers between pieces, which supports steady production on larger cabinet or fixture jobs.
The 15/16 inch width gives enough coverage past the board faces so you can align the Rehau PVC edgebanding 301574-705 to the panel and still have margin to trim back for a clean, square edge. The .018 inch thickness means the material adds only a thin layer at the perimeter, which helps doors and drawer fronts sit closer to design clearances after trimming and finishing operations. The PVC edge banding format works with standard edgebanding application methods, so the material integrates into typical shop workflows for cabinets, furniture, and fixture components that call for this size and decor.
The Rehau PVC edge banding roll 600 ft with part number 301574-705 suits projects that require a 15/16 inch wide edge treatment on sheet goods. That width matches common furniture and cabinet carcass dimensions closely enough to cover both faces of the panel edge in one pass, then trim back for a consistent reveal. The C600503 designation ties this PVC edgebanding to a specific decor family, which supports use anywhere that same surface code appears on board or laminate. The embossed lacquer reference in C600503 EMB LAC points to a textured, coated appearance on the band, aligning it with applications where a coordinated embossed lacquer look is required on visible cabinet, shelving, or fixture edges.
The 15/16 x .018 sizing of this Rehau PVC edgebanding 301574-705 provides predictable coverage and build at the edge, which simplifies setting trimming tools for repeat passes across multiple parts. The PVC construction maintains a consistent cross-section along the 600 ft run, supporting uniform trimming and sanding setups on longer jobs. The clear identification by manufacturer part number 301574-705 and by the SAP description 15/16X.018 C600503 EMB LAC 600FT helps shops call out the same material again whenever matching color, width, and finish on future work, which reduces the risk of mismatched edging across a project. The connection to Rehau, Inc. as the brand places this edgebanding within a defined product class, making it easier to standardize on this edge solution where this decor and dimension are specified.
Rehau PVC edgebanding 301574-705 is 15/16 inch wide and .018 inch thick, giving coverage for common panel edges while keeping the edge profile slim for trimming.
The C600503 embossed lacquer edgeband identified as 15/16X.018 C600503 EMB LAC 600FT is supplied in a 600 ft length to support extended cabinet or furniture production runs.
The C600503 EMB LAC designation identifies a specific Rehau decor with an embossed lacquer surface, helping match this PVC edgebanding to corresponding board or laminate finishes.
The .018 inch thickness keeps the Rehau PVC edgebanding profile thin, so doors, drawer fronts, and panels retain a clean, balanced look after trimming.
The 15/16 inch Rehau PVC edge banding works on cabinet, furniture, and fixture components where this width covers the panel edge and trims back to a straight finished line.
The 600 ft length of Rehau edge banding 600 ft supports continuous edging across multiple parts, reducing changeovers and supporting steady cabinet production.
The Rehau PVC edgebanding 301574-705 from Wurth Baer Supply combines a 15/16 inch width, .018 inch thickness, and C600503 EMB LAC decor into a defined edge solution for cabinet and furniture work. The 600 ft length supports batch runs where this specific embossed lacquer finish is required across many parts. When a project calls for this exact Rehau size and decor, this edge banding keeps exposed panel edges visually aligned with the rest of the surface, supporting a consistent result from part to part.
Sold In: 1 Roll