Rehau PVC edgebanding 301574-706 is a PVC edge banding from Rehau, Inc. that covers and finishes exposed substrate edges, so cabinet and furniture components present a uniform, professional edge instead of raw core material. The product belongs to the edgebanding and edge banding category, which focuses on protecting and dressing panel edges in woodworking applications where consistent appearance around the perimeter matters. The SAP description "15/16X.018 C600502 EMB LAC 600FT" identifies this specific variant by width, thickness, and run length, helping shops match it accurately to their existing layouts and cut lists. The 600FT length referenced in the SAP description indicates a long roll that helps production shops run multiple parts or full jobs without frequent roll changes, which supports smoother throughput on edgebanders or during manual application.
The 15/16X.018 sizing in the SAP description gives installers a defined edge width and thickness to plan around, so trimming and flush-routing steps can be set up to leave a controlled reveal or a near-flush finish on typical panel builds. Because this Rehau PVC edgebanding is labeled as edge banding, it is intended to be applied along the panel edge rather than across the face, which aligns with standard edgebander or manual iron-on style workflows that rely on a narrow, repeatable strip size. The 600FT roll length described in the SAP text lets shops stage longer continuous feeds, reducing the number of starts and stops along the edge, which supports more uniform glue lines and smoother trimming sequences across a run of cabinet parts.
This Rehau PVC edgebanding 301574-706 is categorized as Edgebanding and Edge Banding, so its role is to finish the edges of panels used in cabinetry, furniture, and other woodworking assemblies where exposed core would otherwise show. The SAP description "15/16X.018 C600502 EMB LAC 600FT" defines a narrow strip size and substantial roll length, which suits repetitive cabinet sides, shelves, and door edges that share the same material and finish across an installation. Because it is identified as PVC edgebanding, it is intended to work as a decorative and protective layer along the edge, supporting applications where the edge needs a consistent surface for day-to-day contact in kitchens, offices, or shop-built casework. The Manufacturer Part # 301574-706 ties directly to this configuration, helping shops align it with drawings or material schedules that specify that exact number for matching parts throughout a project.
The 15/16X.018 measurement in the SAP description gives a known starting size for setting up trimming equipment, so operators can dial in cutter height and side-pressure to remove just enough excess material without cutting into the panel face. The 600FT length allows longer continuous passes on an edgebander or in manual workflows, which supports uniform feed rates and consistent heating or adhesive spread from part to part during an entire batch. The C600502 EMB LAC string in the SAP description uniquely identifies this edgebanding variant, which supports repeatable results across multiple jobs because shops can specify the same designation whenever they want identical visual and dimensional performance. As part of Wurth Baer Supply's edgebanding offering, this Rehau PVC edgebanding integrates into woodworking operations that rely on clearly labeled rolls, precise sizing, and traceable part numbers to avoid mismatches and rework when edging cabinet and furniture components.
Rehau PVC edgebanding 301574-706 is a PVC edge banding from Rehau, Inc., used to cover and finish exposed panel edges so cabinet and furniture parts present a uniform edge surface.
The 15/16X.018 dimensions indicate an edgebanding about 15/16 inch wide and .018 inch thick, providing coverage for common panel edges while allowing trimming to a near-flush finished edge.
The 600FT length supports longer continuous runs on an edgebander or during manual application, so shops can process multiple parts or complete jobs with fewer roll changes.
The C600502 EMB LAC designation in the SAP description identifies this specific configuration, supporting consistent selection of the same edgebanding variant across different projects.
Manufacturer Part 301574-706 uniquely identifies this Rehau PVC edgebanding, helping buyers request and reorder the exact product for repeat jobs or matching existing installations.
This product sits in Wurth Baer Supply's Miscellaneous|Edgebanding and Edge Banding categories, aligning it with other materials used to finish and protect panel edges in woodworking.
Rehau PVC edgebanding 301574-706, identified by the SAP description "15/16X.018 C600502 EMB LAC 600FT," delivers a defined strip size and extended length for cabinet and furniture edge treatment. The 15/16X.018 dimensions give installers a predictable profile to trim and finish, while the 600FT roll length supports efficient runs through shop workflows that handle repeated parts. With its clear classification as Edgebanding and Edge Banding and its specific Manufacturer Part # 301574-706, this product aligns closely with documented material schedules, so woodworking operations can match edge treatment to project requirements and maintain consistent results.
Sold In: 1 Roll