Rehau PVC edgebanding 301674-287 is a Rehau, Inc. edge banding product designed to finish and protect exposed edges on panels and components in woodworking projects. The PVC construction provides a consistent man-made edge surface that helps create a uniform appearance across multiple parts on the same job. The 15/16 inch nominal width gives coverage for common panel thicknesses while allowing a bit of trim margin, which supports a clean final edge after routing or flushing. The .018 inch thickness offers a slim profile that helps maintain design lines on casework and doors without adding noticeable bulk. The CP10031 designation identifies the specific Rehau formulation and appearance family, which helps match this coil with existing installations using the same reference. The 600 ft length is suited to production runs or repeated shop use where staying on the same material code streamlines workflow and ordering.
The SAP description 15/16X.018 CP10031 LAC 600FT indicates a 15/16 inch width that gives installers extra material over typical panel thickness, allowing trimming or scraping to a flush edge after bonding. The .018 inch thickness referenced in the same description defines a relatively thin band, which helps maintain tight edge transitions and supports machining with standard edgebanding equipment. The CP10031 code groups this edgebanding into a specific Rehau series so shops matching that code can maintain continuity from existing projects. The 600 ft length provides extended material for set-ups, which allows a line operator to run multiple carcasses, doors, or shelves without stopping for frequent coil changes, supporting more continuous processing.
This Rehau, Inc. product is classified by Wurth Baer Supply under Miscellaneous|Edgebanding, placing it squarely in applications where exposed substrate edges need a finished appearance. The edge banding designation means it is intended for use on panel edges in cabinetry, furniture components, and other woodworking where a defined PVC edge is part of the construction. The 15/16 inch width described as 15/16X.018 CP10031 LAC 600FT gives coverage across typical panel thicknesses used in these applications, allowing installers to center the band and then trim to a clean, flush line. Because the thickness is identified as .018 inch, the banding sits close to the panel face, which helps projects maintain sharp visual lines on doors, drawer fronts, and casework. The CP10031 reference allows shops that already specify that code to treat this coil as a matching edge solution across related parts in the same project family.
The manufacturer part number 301674-287 gives shops a precise identifier for this PVC edgebanding, which supports repeat orders that behave the same in edgebanding machines from setup to setup. The SAP description spelling out 15/16X.018 CP10031 LAC 600FT provides installers and planners with concrete size information, helping them align feed settings, trimming tools, and expected reveal. With a defined .018 inch thickness, trimming and scraping steps can be tuned to that profile so operators can dial in consistent flush results across long runs. The 600 ft length recorded in the description means a single coil can support extended production, reducing interruptions from changing material and helping edge processing flow more predictably. Being identified specifically as Rehau PVC edgebanding ties the material behavior to a known PVC edge banding class, which lets equipment operators rely on familiar handling characteristics when setting temperature and feed parameters within their established shop practices.
Rehau 301674-287 is a PVC edge banding product, so it is intended for covering and finishing exposed panel edges in woodworking and cabinet construction.
The 15/16X.018 notation in the SAP description indicates a nominal 15/16 inch width and .018 inch thickness, helping installers plan trim allowance and machine settings.
The 600 ft length noted in the SAP description supports longer production runs, so edge banding operations can continue across multiple parts without frequent material changeovers.
The CP10031 designation in the SAP description identifies the specific Rehau reference for this PVC edgebanding, helping match it to existing jobs that call out the same code.
This edgebanding is manufactured by Rehau, Inc., so it aligns with other Rehau PVC edgebanding products used in professional woodworking environments.
Being classified as edge banding by Wurth Baer Supply means the product is intended specifically for finishing raw panel edges in cabinetry and woodworking projects.
The Rehau PVC edgebanding 301674-287 from Wurth Baer Supply combines a defined 15/16 inch width, .018 inch thickness, and 600 ft length to support repeatable panel edge finishing. The clear CP10031 and 301674-287 identifiers give shops a consistent reference for specifying, ordering, and reordering the same PVC edge banding across projects. For operations that rely on uniform edges in cabinetry and woodworking, these verified details help align material choice with established machine setups and production workflows.
Sold In: 1 Roll