Rehau PVC edgebanding 301674-315 is a PVC edge banding from Rehau, Inc. that covers exposed board edges on cabinets, furniture, and casework so those edges present as finished surfaces instead of raw substrate. The WA 4796 Burnished Chestnut designation identifies the specific Burnished Chestnut appearance in the WA 4796 series, which keeps color and pattern consistent across all matching edges in a project. The 15/16 inch width in the SAP description WA 4796 Burnished Chestnut 15/16X018X600 gives enough coverage for common panel thicknesses while still allowing a trim pass to flush the edge, which supports tight visual lines. The 018 thickness noted in the same description defines the PVC gauge at the edge, which affects how the band responds to trimming tools. The 600 length reference provides extended run capacity, which helps reduce joint breaks along long cabinet runs and larger furniture components where continuous edges are preferred.
The 15/16 inch width in WA 4796 Burnished Chestnut 15/16X018X600 provides slight overhang beyond typical panel thicknesses, which gives edge-banding machines and hand trimmers the material they need for clean flush passes. The 018 thickness in the same description defines the PVC wall that trimming and scraping tools work against, which influences cut feel and how aggressively tools can be set without biting into the core panel. The PVC material identified in the name Rehau PVC Edgebanding works with common edge-banding equipment and trimming tools, supporting straightforward setups across repeated runs. The manufacturer part number 301674-315 provides a stable reference for matching future orders, so replacement runs can repeat the same dimensions and WA 4796 Burnished Chestnut appearance on later jobs.
The category Miscellaneous|Edgebanding and product class Edge Banding place Rehau PVC Edgebanding, 301674-315 directly in typical woodworking edge-finishing work, so it suits cabinet shops, furniture builders, and casework producers. The WA 4796 Burnished Chestnut appearance links this edgebanding to Burnished Chestnut projects where exposed panel edges need the same design language as faces, helping doors, drawer fronts, and carcass edges read as a single coordinated surface. The 15/16 inch width in WA 4796 Burnished Chestnut 15/16X018X600 provides coverage for many standard board builds, which supports use across cabinet sides, shelving, and furniture tops that follow common thicknesses. The 600 length reference suits longer production passes, allowing shops to run tall pantry panels or extended counters with continuous WA 4796 Burnished Chestnut edges that visually track across the full span.
The Rehau, Inc. brand combined with the manufacturer part number 301674-315 ties this edgebanding to a defined production line, which helps maintain consistency when a project requires repeat orders or service work years later. The WA 4796 Burnished Chestnut identifier in the SAP description WA 4796 Burnished Chestnut 15/16X018X600 points to a specific decorative pattern, so when panels and edge treatments use that same identifier, color and pattern alignment stays controlled from part to part. The 15/16X018 sizing in the SAP description gives edge equipment operators known parameters for feed pressure, heat, and trimming setup, which supports repeatable results when switching between jobs. The classification as Edge Banding underlines that this material is intended to be applied at the panel perimeter, so it occupies a predictable role in the workflow: conceal the core, align with WA 4796 Burnished Chestnut faces, and present a finished edge line.
The SAP description WA 4796 Burnished Chestnut 15/16X018X600 identifies this specific Burnished Chestnut appearance and dimension set, helping match edges to panels using the same WA 4796 Burnished Chestnut design.
The 15/16 inch width in WA 4796 Burnished Chestnut 15/16X018X600 provides overhang across common panel thicknesses, supporting clean flush trimming and consistent edge lines on cabinets and furniture.
The 018 thickness in the SAP description sets the PVC wall the trimmers cut against, influencing tool setup and how smoothly edges scrape to a finished profile without digging into the core.
The 600 length reference supports long, continuous passes on tall panels or extended runs, reducing edge seams that would otherwise interrupt the WA 4796 Burnished Chestnut pattern.
The manufacturer part number 301674-315 uniquely identifies this Rehau PVC edgebanding configuration, helping reorder the same WA 4796 Burnished Chestnut size and look for repeat or repair work.
The category Miscellaneous|Edgebanding and product class Edge Banding define it as edge-finishing material for woodworking, fitting directly into cabinet, furniture, and casework edge processes.
The Rehau PVC Edgebanding, 301674-315 pairs a WA 4796 Burnished Chestnut appearance with 15/16X018X600 sizing, so exposed panel edges can track with Burnished Chestnut surfaces across a project. The Edge Banding classification and PVC material give this product a clear role at the perimeter of cabinets, furniture, and casework, where covering the core and aligning color matter on every run. Using the manufacturer part number 301674-315 and the SAP description WA 4796 Burnished Chestnut 15/16X018X600, projects can repeat the same edge look from initial build through later additions.
Sold In: 1 Roll