Rehau PVC edgebanding 301674-374, 15/16 x .018

Rehau PVC Edgebanding 301674-374 For Clean Panel Edges

Rehau PVC edgebanding 301674-374 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges on cabinetry and casework, giving a finished look that matches the panel layout. The 15/16 inch width stated in the SAP description provides coverage over typical 3/4 inch panel edges with margin for trimming, helping installers hide small alignment variations along the run. The .018 inch thickness noted in the SAP description offers a low-profile edge that machines easily, supporting smooth trimming without creating a bulky edge line. The CP20625 reference contained in the SAP description identifies a specific Rehau configuration, so shops can repeat the same edge detail across multiple jobs. The 600FT length identified in the SAP description supplies a continuous run of edgeband, reducing splice points on longer cabinets and closet sections.

Key Rehau PVC Edge Banding Details For Shops

• The product class "Edge Banding" defines this item as a banded edge solution for covering exposed substrate, which helps shops move from raw panel edges to finished faces in one continuous workflow on edgebanders.
• The category listing "Miscellaneous|Edgebanding" positions this product for general edgebanding use, so it can serve a wide range of cabinet, furniture, or casework runs where a PVC edge solution is required.
• The manufacturer part number 301674-374 gives production teams a precise reference when reordering, which supports consistent color and profile selection across multiple projects and locations.
• The SAP description "15/16X.018 CP20625 LAC 600FT" gathers the size, configuration, and roll length in one code, simplifying job planning, estimating, and labeling on the shop floor.
• The brand designation "Rehau, Inc." ties this edgebanding to a dedicated edge banding manufacturer, which helps specifiers align this roll with existing Rehau-based panel programs and documented shop standards.

Size And Format Details That Affect Installation

The 15/16 inch width specified in the SAP description gives installers working room past a 3/4 inch panel edge, so trimming operations can yield a clean flush line without risking exposed substrate. The .018 inch thickness delivered by this Rehau PVC edge banding supports typical automatic and manual trimming tools, helping operators achieve a smooth edge with moderate cutting pressure and predictable chip removal. The 600FT length called out in the SAP description means long cabinet banks or multiple smaller units can be processed from one roll, reducing changeovers during edgebanding runs. Identifying the product as PVC edge banding connects it directly to standard edgebanding machinery designed for PVC, supporting consistent heat and feed setups on repeated jobs.

How Rehau 301674-374 Works In Woodworking Projects

Where This PVC Edgebanding Fits Best

The product class "Edge Banding" and category "Miscellaneous|Edgebanding" place Rehau PVC edgebanding 301674-374 in general cabinet and woodworking environments where panel edges must be finished. The 15/16 inch width from the SAP description suits applications using panel stock near 3/4 inch thickness, allowing the band to overhang slightly on both faces for later trimming. Because the SAP description specifies a .018 inch thickness, this edgebanding aligns with projects that need a slim edge profile, such as residential cabinetry, closet systems, or light commercial casework where a subtle edge line is preferred. The 600FT roll length works well in production or larger custom shops, where long runs of shelving, gables, and cabinet sides benefit from uninterrupted edging with fewer roll changes between batches.

Why These Dimensions Support Repeatable Results

The defined 15/16 inch width gives operators a consistent reference when setting trimming stations, leading to repeatable flush cuts along cabinet doors, drawer fronts, and panels. The .018 inch thickness, as noted in the SAP description, offers a balance between flexibility and profile definition, which helps keep the edge stable during application while still allowing clean radius or flush trimming passes. The CP20625 identification in the SAP description signals a specific configuration within the Rehau PVC edgebanding line, so shops can standardize setups and know that future rolls marked 301674-374 will match prior runs. The 600FT length reduces transitions between rolls during edgebanding, which limits visible seams along long cabinet banks and keeps production flow steadier from start to finish.

Common Questions About Rehau PVC Edgebanding 301674-374

Select Rehau 301674-374 For Consistent Edge Finishing

Rehau PVC edgebanding 301674-374 combines a 15/16 inch width, .018 inch thickness, and 600FT roll length as detailed in the SAP description, giving woodworking shops a repeatable edge solution for panel-based projects. The defined CP20625 configuration and manufacturer part number 301674-374 let production teams tie drawings, cut lists, and machine setups to a single, clearly identified PVC edge banding. For cabinet, furniture, or casework runs that rely on consistent dimensions and stable supply, this Rehau PVC edge banding offers a clearly specified option that fits directly into established edgebanding workflows.