Rehau PVC edgebanding 301674-392 is a PVC edge banding product from Rehau, Inc. that finishes exposed panel edges so cut board edges present a uniform, professional look on cabinets and casework. The SAP description 15/16X.018 CP20621 LAC 600FT identifies a 15/16 inch wide, 0.018 inch thick PVC strip, giving coverage suited to standard panel thicknesses while keeping a slim, unobtrusive profile along the edge. The 600FT length description indicates a long continuous roll, which reduces changeovers during production runs and supports consistent results across multiple parts. Being part of the Edge Banding product class positions this material for routine woodworking and cabinet projects where edge protection and a finished appearance matter on melamine, laminate, or similar substrates.
The 15/16 inch width stated in the SAP description gives a band slightly wider than many common panel thicknesses, allowing installers to position the PVC flush to one face and trim the other side to final size. This extra coverage supports accurate alignment on doors, drawer fronts, and carcass parts while still keeping trimming manageable. The 0.018 inch thickness keeps the edge banding relatively thin, so trimming and scraping demand less effort and the finished edge remains close to the panel plane. Together, these dimensions let shops integrate this Rehau PVC edgebanding into standard edgebanding equipment setups that are already tuned for light PVC profiles on cabinet and woodworking runs.
The Edge Banding product class and PVC description position Rehau PVC edgebanding 301674-392 for finishing exposed edges on cabinet components, shelves, and casework panels rather than structural joints. The 15/16 inch width from the 15/16X.018 CP20621 LAC 600FT description suits typical board thicknesses used in cabinets and commercial fixtures, giving coverage for vertical sides, horizontal shelves, and door edges. The long 600FT roll length supports batch production of matching parts, helping shops keep color and texture consistent along entire runs. As a Rehau, Inc. product identified by manufacturer part 301674-392, this banding can be tied to drawings, cut lists, or job specifications that call out this exact part number for repeat jobs and service work.
The specific dimensions in the SAP description - 15/16 inch width and 0.018 inch thickness - allow edgebanding equipment to be set for a known, consistent profile, which supports repeatable trimming and scraping from job to job. The thin PVC thickness helps cutters and scrapers remove overhang cleanly, reducing the risk of a heavy ridge at the edge that could affect door reveals or panel fit. The 600FT length contributes to process stability, since operators can run a substantial number of parts before changing rolls, limiting small variations that may occur when starting and stopping. The clear manufacturer part number 301674-392 ties performance expectations to a single defined product, which helps shops match future runs or repairs to the same PVC edge appearance and fit.
Rehau PVC edgebanding 301674-392 is a PVC edge banding product classified as Edge Banding, used to finish and protect exposed panel edges on cabinets and other woodworking projects.
Rehau PVC edgebanding 301674-392 has a stated width of 15/16 inch, giving coverage to standard panel edges while leaving a small amount available for trimming to final size.
Rehau PVC edgebanding 301674-392 has a 0.018 inch thickness, which keeps the edge profile slim and supports light trimming and scraping on typical edgebanding equipment.
Rehau PVC edgebanding 301674-392 is identified with a 600FT length, providing extended continuous material for running multiple cabinet or casework parts in a single setup.
The 301674-392 PVC edgebanding is manufactured by Rehau, Inc., positioning it within Rehau's edgebanding product range for cabinet and woodworking applications.
This Rehau PVC edgebanding is identified by manufacturer part 301674-392 and the SAP description 15/16X.018 CP20621 LAC 600FT, which helps align future orders with the same product.
The SAP description 15/16X.018 CP20621 LAC 600FT and manufacturer part 301674-392 define a specific Rehau PVC edgebanding with known width, thickness, and roll length, so shops can align setups and documents around one repeatable edge solution. The Edge Banding classification and PVC material focus this item on finishing exposed board edges on cabinet and woodworking projects. For work that calls for a 15/16 inch wide, 0.018 inch thick PVC strip in long 600FT runs, this Rehau PVC edgebanding 301674-392 offers a clearly specified option to match that requirement.
Sold In: 1 Roll