Rehau PVC edgebanding 301674-518 is a PVC edge banding from Rehau, Inc. that covers raw board edges, so exposed substrate is concealed and the finished panel presents a unified surface. The 15/16 inch width spans standard panel thickness while allowing minor overhang, giving room for trimming tools to flush the edge without exposing the core. The .018 inch thickness creates a slim band, so the transition between face material and edge stays tight and understated on casework or shelving. The CP40438 LAC designation identifies the specific color and laminate coordination, helping align edge appearance with the matching surface in shop layouts. The 600 ft length groups a large amount of material on a single roll, so longer runs of cabinets or fixtures can be completed with fewer changeovers during production. The SAP and manufacturer numbers track this exact band for repeat orders.
This Rehau PVC edge banding uses a 15/16 inch width, giving coverage beyond a 3/4 inch panel edge so trimming operations can remove slight overhang while still keeping full edge protection. The .018 inch thickness defines a thin band that responds consistently to pressure rollers and trimming blades, supporting smooth passes on edgebanders or hand-trim setups. With 600 ft of material identified on the SAP description, a single roll can be allocated to multiple cabinets or full-room runs without frequent material changes, helping maintain uniform appearance across all edged parts. The CP40438 LAC coding and Rehau 301674-518 number keep this exact size and color combination easy to reference in shop records and cut lists.
The Rehau PVC edgebanding, 301674-518, is categorized as edge banding, placing it in typical panel, cabinet, and furniture workflows where exposed edges need covering. The 15/16 inch dimension suits projects built from sheet goods near 3/4 inch thick, such as case sides, shelves, and door components, so one size can address many parts in the same job. With the .018 inch thickness, the band introduces minimal edge build-up, supporting applications where doors or panels close against each other and need a lean edge to maintain reveals. The CP40438 LAC designation anchors this band to a defined appearance, so it can be assigned in drawings and job tickets wherever that specific look is required. The 600 ft length supports both small runs and larger installations by drawing from the same continuous material, which helps keep color and sheen consistent between early and late pieces in the schedule.
The defined 15/16 inch by .018 inch sizing of this Rehau PVC edge banding sets clear trimming expectations, so operators can dial in edgebander settings and reuse them across similar jobs. The PVC material type aligns with common edgebanding machinery, so feed pressures, cutting speeds, and knife setups used for other PVC bands in the shop apply directly here, reducing test pieces. The 301674-518 manufacturer part number and matching SAP description 15/16X.018 CP40438 LAC 600FT give an exact reference, which keeps purchasing and production aligned on the same band when reordering or cloning successful projects. The 600 ft length further stabilizes workflow because an entire batch of cabinet components, panels, or fixtures can often be run from one continuous supply, limiting visual variation between units produced at different times during the job.
Rehau PVC edgebanding 301674-518 has a 15/16 inch width and .018 inch thickness, giving coverage for typical panel edges while keeping the edge profile thin for a tight, clean transition.
The 600 ft length on the SAP description provides a long run of material, so multiple cabinets or panels can be edged from one roll, supporting consistent appearance across a project.
The CP40438 LAC code identifies a specific color and coordination reference, so this edgebanding can be matched to the same coded laminate or finish schedule in project planning.
Rehau 301674-518 is PVC edge banding, meaning it is a plastic band designed for use with standard PVC edgebanding equipment and typical trimming processes in woodworking shops.
The 15/16 inch width suits projects using sheet goods near 3/4 inch thick, allowing slight overhang for trimming while still fully covering the board edge on cabinets and panels.
The .018 inch thickness produces a slim edge that reduces build-up, helping doors, drawer fronts, and panels maintain clean reveals and a subtle transition at the edge.
Rehau PVC edgebanding 301674-518 combines a 15/16 inch width, .018 inch thickness, and CP40438 LAC color reference, giving a defined size and appearance for edge treatment on panel projects. With 600 ft identified in the SAP description, this roll supports both short batches and extended cabinet or fixture runs while keeping the same material in play. Using the exact Rehau part number 301674-518 through Wurth Baer Supply ties purchasing and production to the same PVC edge banding each time you repeat a successful job.
Sold In: 1 Roll