Rehau PVC edgebanding 301674-551 is a Rehau, Inc. edge banding product designed to cover and protect exposed panel edges, so cabinet and furniture projects finish with a clean, professional look that hides raw core material. This product is identified as PI HP688 Arbor Myrtle 15/16X018X600', which ties the color and design line to a specific Arbor Myrtle appearance for visual coordination across a project. The 15/16 inch width is sized to cover common 3/4 inch panels with a small overhang, giving room to trim flush without risking show-through at the edge. The 0.018 inch thickness supports a slim, modern edge profile that keeps panels looking refined while still masking the substrate. A 600 foot length supports longer runs or multiple jobs from a single coil, which reduces changeovers and helps maintain consistency across many pieces.
This Rehau, Inc. edge banding is classified as edge banding in the edgebanding category, so it is intended to be applied to panel edges as part of a standard edgebanding workflow. The 15/16 inch width means it is sized for use on common casework thicknesses while leaving material for trimming, which is important when running parts through an edgebander or using manual trimmers. The 0.018 inch thickness influences heat, pressure, and trimming setup, because a thinner band tends to yield a tight, low-profile edge when cut back to the panel face. The extended 600 foot length supports uninterrupted runs on edgebanding equipment, helping maintain the same product and appearance from the first part to the last part of a batch.
This product is classified as Rehau PVC Edgebanding, 301674-551, in the edge banding product class, so it is suited to projects where PVC edgebanding is specified for casework, cabinetry, or furniture components. The PI HP688 Arbor Myrtle designation connects it to the Arbor Myrtle look, which supports projects that are designed around that pattern or a coordinating scheme across doors, drawer fronts, shelves, and carcasses. Because it sits in the edgebanding category, its role is to finish the narrow edges of sheet goods so exposed cores are no longer visible, which is important for both appearance and edge protection. The combination of Arbor Myrtle identity and PVC construction means the same visual language can carry across multiple components while using an edge material that is purpose-built for this type of application.
The stated 15/16X018X600' dimension set describes 15/16 inch width, 0.018 inch thickness, and 600 foot length, which directly shapes how this edge banding behaves in a shop workflow. On typical 3/4 inch panels, the 15/16 inch width leaves usable overhang at both faces, which gives edgebanding machines and manual trimmers room to cut back to a crisp edge without exposing the core. The 0.018 inch thickness creates a thin edge band profile, which helps panels keep a sleek line at doors and drawer fronts where bulkier edges can stand proud. The 600 foot length supports longer production runs from a single roll, which keeps the same Arbor Myrtle appearance running through entire kitchens or banked casework without changing to another coil. Identifying the product by manufacturer part number 301674-551 also helps align this exact size and color choice with drawings, cut lists, or reorder needs so the same banding can be used consistently during future work.
Rehau PVC Edgebanding, 301674-551, is described as PVC edgebanding, so it uses PVC as the edge material, which is suited to covering panel edges in cabinetry and furniture work.
The PI HP688 Arbor Myrtle 15/16X018X600' sizing provides 15/16 inch width, giving extra coverage beyond a 3/4 inch panel so edges can be trimmed flush without exposing the core.
The 0.018 inch thickness in the 15/16X018X600' dimensions yields a thin edge profile, which supports a clean, low-profile edge line after trimming on cabinet and furniture components.
The 600 foot length stated in PI HP688 Arbor Myrtle 15/16X018X600' allows longer production runs from one coil, helping maintain consistent appearance across many parts in a project.
The PI HP688 Arbor Myrtle designation ties this Rehau PVC edgebanding to an Arbor Myrtle design line, helping coordinate edge appearance with matching or related surfaces on a project.
The manufacturer part number 301674-551 uniquely identifies this Rehau, Inc. PVC edgebanding size and Arbor Myrtle design, which supports accurate ordering and consistent repeat use on future work.
This Rehau PVC Edgebanding, 301674-551, combines Arbor Myrtle identity with 15/16X018X600' sizing so exposed panel edges can match related surfaces while staying slim and precise. For cabinet, furniture, or casework runs built around this design, choosing this specific edge banding keeps the dimensions, material, and color reference aligned with drawings and part numbers, which supports consistent results from job to job.
Sold In: 1 Roll