Rehau PVC edgebanding 301674-580 is a PVC edge banding from Rehau, Inc. that provides a finished edge on panel projects, so raw substrate edges transition to a cleaner, more professional-looking line. The 15/16 inch width covers standard panel thickness with a slight overhang, giving room to trim flush for a tight, accurate edge. The .018 inch thickness keeps the banding relatively thin, which helps follow straight panel runs while limiting the amount of material to be trimmed. The CP40223 designation identifies the specific color or pattern family, so edging can be matched across multiple components within the same job. Supplied in a 600FT length, this edgebanding supports longer runs or multiple cabinets from a single roll, reducing changeovers during production. As an edge banding product from Rehau, Inc., it is positioned for woodworking and casework applications where uniform appearance along exposed edges matters.
The 15/16 inch width of this Rehau PVC edge banding is wider than many common panel thicknesses, so the banding can be positioned slightly proud on both faces and then trimmed flush, aiding accurate edge alignment. The .018 inch thickness keeps the material light and manageable during feed, which benefits installers using edgebanders or hand-application methods that rely on controlled trimming. With a 600FT length, a single roll can be run through a series of panels without frequent roll changes, supporting a smoother installation sequence and more uniform trim results from piece to piece.
This Rehau PVC edgebanding, designated by manufacturer part number 301674-580, fits projects where exposed panel edges need to be covered with a defined PVC edge band. The 15/16 inch width suits applications on panels where a slight overhang is preferred before trimming, such as cabinet sides, shelves, or similar casework elements. Because it belongs to the CP40223 series, it aligns with projects already specified to that color or pattern, helping different panels within the same installation share a consistent edge appearance. The 600FT length is suited to production or multi-cabinet runs, where multiple parts must share the same Rehau PVC edge banding without interruption between rolls.
The combination of 15/16 inch width and .018 inch thickness in this Rehau PVC edge banding directly affects trimming and finishing steps, because the slight extra width allows careful alignment while the thin profile trims back without creating a bulky edge. The CP40223 code provides a precise visual reference, so when shops specify 301674-580 they are calling out both the material type and its associated appearance, which helps maintain the same look on replacement parts or future additions. The 600FT roll length matters in repeat work, since using a single roll on a run of cabinets or furniture components helps keep the edge banding appearance continuous from piece to piece.
Rehau PVC edgebanding 301674-580 is 15/16 inch wide and .018 inch thick, which supports trimming to a flush, neat edge on typical panel thicknesses in cabinet and panel construction.
The 600FT length allows long runs or multiple cabinets to be edged from one roll, which supports consistent appearance across all panels in the same job and reduces mid-run roll changes.
The CP40223 designation identifies the specific Rehau series for this PVC edge banding, so projects specified to CP40223 can match color or pattern across different parts.
This Rehau PVC edge banding is used to cover exposed panel edges so raw core material is hidden, providing a defined PVC edge on cabinets, shelves, or similar casework components.
The 15/16 inch width gives slight overhang on many panels, allowing installers to align the banding and trim it back to a clean, precise edge without exposing the substrate.
The .018 inch thickness provides a relatively thin PVC edge, which helps trimming tools cut cleanly and leaves a modest edge profile on cabinet or furniture fronts.
Rehau PVC edgebanding 301674-580 combines a 15/16 inch width, .018 inch thickness, CP40223 series designation, and 600FT length to support cabinet and panel work that calls for a defined PVC edge. For projects already specified to Rehau CP40223, using this edge banding helps maintain consistent appearance along every exposed edge in a run of parts. Add this Rehau PVC edge banding to the job so panel edges match the intended specification from the first cabinet through the last.
Sold In: 1 Roll