Rehau PVC edgebanding 301674-614 is a PVC edge banding product that finishes and protects raw panel edges, so cabinet and fixture projects gain a defined edge and a consistent appearance along every exposed run. The product sits in the Edgebanding category and Edge Banding product class, which positions it for covering exposed edges on cabinet components, casework, and other laminated panels where a PVC edge is preferred. The SAP description "15/16X.018 CP20338 LAC 600FT" identifies a 15/16 inch wide, .018 inch thick PVC strip supplied in a long run, so straight edges on standard panel thicknesses can be processed efficiently in a shop workflow that favors continuous rolls for repeated edge applications.
The SAP description "15/16X.018 CP20338 LAC 600FT" provides the key size and format indicators, so installers know they are working with 15/16 inch wide, .018 inch thick PVC in a 600 foot run that suits extended cabinet and panel edging work. This format fits edge banding equipment and manual methods set up for standard-width PVC strips, which supports repeatable processing from part to part once machines are dialed in for this width and thickness.
This Rehau PVC edgebanding, identified as 301674-614 and described as "15/16X.018 CP20338 LAC 600FT," fits projects that rely on PVC edge treatment around casework, cabinetry, and similar panel-based builds using laminate or engineered cores. The Edge Banding product class and placement in the Edgebanding category define it as a solution for finishing exposed panel edges, so it is suited to vertical and horizontal cabinet parts where a consistent edge detail is needed around doors, drawer fronts, ends, and partitions. The 15/16 inch width allows coverage across common panel thicknesses used in cabinet construction, which helps keep the decorative edge running slightly proud before trimming for a flush finish. In shops working with repeated cabinet dimensions, this width streamlines setups because one size can service many similar parts.
The .018 inch thickness called out in the SAP description gives the PVC strip a modest build that defines the edge without creating a bulky lip, so trimming and finishing operations produce a clean transition between face and edge on cabinet components. This thickness level works well when panel layouts demand a controlled reveal, because there is enough material for a solid edge appearance while staying friendly to standard trimmers and edge-processing equipment. The 600FT length noted in the description supports continuous runs through edge banders, allowing long cabinet batches or multiple related projects to be processed from a single roll, which helps keep edge color and sheen consistent across doors, drawer fronts, and carcass parts. The CP20338 identifier ties the product to a specific Rehau series, so shops aligning surface materials and edging can reference that designation when coordinating finishes on repeat or matching jobs.
The 15/16 x .018 size in the SAP description means the strip is 15/16 inch wide and .018 inch thick, giving coverage for common panel thicknesses while keeping a low-profile edge for cabinet parts.
The 600FT length provides a long continuous roll, supporting extended cabinet or casework runs so multiple parts can be edged from one roll with consistent appearance and fewer changeovers.
The CP20338 element in the SAP description identifies a specific Rehau series for this PVC edgebanding, helping shops coordinate edge appearance with related surfaces or existing Rehau-based projects.
This product is listed in the Edgebanding category and Edge Banding product class, marking it as a PVC edge treatment suited to cabinet, casework, and similar panel-based woodworking projects.
The 15/16 inch width gives slight overhang on typical panel thicknesses, so after trimming, the decorative PVC edge fully covers the core and leaves a clean line on cabinet components.
This PVC edgebanding is produced by Rehau, Inc., identified by manufacturer part number 301674-614, placing it within Rehau's dedicated edgebanding offering for panel finishing.
Rehau PVC edgebanding 301674-614, defined by the SAP description "15/16X.018 CP20338 LAC 600FT," offers a 15/16 inch wide, .018 inch thick PVC strip in a 600 foot roll suited to repeated cabinet and panel edging. For shops building casework or fixtures around laminate or engineered cores, this Edge Banding product format supports consistent, continuous edging runs where a dedicated Rehau series such as CP20338 aligns with the overall design. Choosing this edgebanding lets installers match standard panel dimensions with a PVC edge sized for efficient trimming and uniform finished lines across related components.
Sold In: 1 Roll