Rehau PVC edgebanding 301674-755 is a PVC edge banding from Rehau, Inc. that provides a finished edge on panel and board projects, so cabinet and furniture work has a consistent, professional perimeter. The 15/16 inch width described by 15/16X.018 CP40590 LAC 600FT covers common panel thicknesses with some overhang for trimming, which helps installers achieve a straight, flush edge. The .018 inch thickness in the SAP description indicates a thin PVC profile, allowing tight edge transitions that blend with adjacent surfaces. The 600FT length in the SAP description supports long production runs or multiple jobs from a single coil, reducing changeovers on edgebanders. The product class Edgebanding confirms this material is intended for edging applications, so it fits naturally into woodworking workflows where exposed substrate edges need to be covered.
The SAP description 15/16X.018 CP40590 LAC 600FT specifies a 15/16 inch wide strip, giving coverage across the face of typical boards with slight overhang that can be trimmed during installation. The .018 inch thickness creates a slim edge, which helps produce neat transitions at corners and joints when routed or flushed. The 600FT coil length supports setups where an edgebander processes many parts in sequence, keeping the material feed consistent through longer runs. As a PVC edge banding from Rehau, Inc., the product is structured for edging equipment and manual application methods that work with flexible plastic strips. The defined width, thickness, and length together give installers predictable handling and feed behavior on their machinery.
The category listing Miscellaneous|Edgebanding places this Rehau PVC Edgebanding, 301674-755 directly in the edgebanding segment, so it is intended for edging exposed panel sides in woodworking. As an edge banding product class, it works along the perimeter of cabinet boxes, shelving, and similar constructions where the substrate core would otherwise be visible. The 15/16 inch width defined in 15/16X.018 CP40590 LAC 600FT covers the full thickness of many common casework panels, allowing a continuous strip along vertical and horizontal edges. Because the SAP description pairs this width with 600FT length, shops can run longer cabinet or furniture batches without switching coils frequently, which helps maintain consistency from the first part to the last.
The combination of 15/16 inch width and .018 inch thickness in the SAP description supports predictable trimming behavior, so edge flush trimming tools remove a small, known amount of overhang instead of large excess. This predictable geometry helps keep edges square and reduces the risk of cutting into the panel face. The PVC construction noted in the name Rehau PVC Edgebanding means the material responds uniformly to standard edgebanding equipment settings, supporting repeat setups across different jobs. The 600FT length described in 15/16X.018 CP40590 LAC 600FT enables operators to keep one continuous run of material through multiple cabinet or shelving components, which helps align color and appearance for a cohesive installation. The manufacturer part number 301674-755 and CP40590 LAC code provide a fixed reference, so shops can reorder the same edgebanding when matching previous work or extending an existing project.
Rehau PVC Edgebanding 301674-755 is an edge banding product from Rehau, Inc., used to cover exposed panel edges so cabinet and furniture pieces present a finished perimeter.
The 15/16X.018 in the SAP description indicates 15/16 inch width and .018 inch thickness, giving full edge coverage with a slim profile that trims cleanly on standard edgebanding equipment.
The 600FT length described in 15/16X.018 CP40590 LAC 600FT supports long production runs, so operators can feed many parts without frequent coil changes.
CP40590 LAC in the SAP description uniquely identifies this specific Rehau edgebanding variant, helping shops specify and repeat the same material on future orders.
The PVC material referenced in Rehau PVC Edgebanding provides a machinable plastic edge that works well with cutting, routing, and trimming processes common in woodworking.
The manufacturer part number 301674-755 ties directly to this Rehau PVC edgebanding specification, so fabricators can identify and request the same edge banding by code.
Rehau PVC Edgebanding, 301674-755 combines a 15/16 inch width, .018 inch thickness, and 600FT length to support efficient cabinet and furniture edge work. For woodworking projects that call for dedicated edge banding from Rehau, Inc., this PVC edgebanding offers defined dimensions and a specific CP40590 LAC formulation that align with repeatable shop setups. Selecting this manufacturer part number 301674-755 through Wurth Baer Supply connects your projects to a consistent edging material that fits established edgebanding processes.
Sold In: 1 Roll