Rehau PVC Edgebanding 301674-816 is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges so cut boards present a uniform, usable edge on cabinets, fixtures, and other casework. The edgebanding belongs to the Edge Banding product class, so it is designed specifically for edging applications rather than general trim, which helps keep material selection straightforward on shop projects. The width is 15/16 inch, which gives a bit of overhang on standard 3/4 inch panels and allows trimming back to a flush, precise edge in the shop. The thickness is .018 inch, so it lays as a thin, workable layer that can be bonded and trimmed without adding bulk at the edge. The material length is 600 feet, which supports longer runs and repeat work from the same roll on production jobs.
The SAP description for this Rehau PVC edge banding states a width of 15/16 inch, which gives extra coverage beyond a typical 3/4 inch substrate so the installer can trim back to a clean, flush line after bonding. The .018 inch thickness from the same description indicates a relatively thin band, which helps it conform closely to the panel edge profile and limits the step at the edge once trimmed. The 600 foot length specified in the SAP description means the same size and code can be carried across many parts on a job, keeping edge appearance and sizing consistent from panel to panel.
This product is classified as Edge Banding in the Edgebanding category, so it is intended for covering exposed panel edges in woodworking and cabinet-related work rather than acting as a structural element. The 15/16 inch width stated in the SAP description makes it a practical match for edging panels in the common 3/4 inch range, because the extra fraction of an inch gives working room for trimming without risking a short reveal. The PVC material, specified in the product name as Rehau PVC Edgebanding, is suited to forming a continuous edge surface on man-made boards, so shop users can run consistent edge treatment across cabinet sides, shelves, and similar components.
The manufacturer part number 301674-816 allows shops to call out the exact same Rehau PVC edge banding on drawings and purchase documents, which supports repeat jobs and service work when identical edging is required. The CP20123 LAC designation in the SAP description provides another precise reference back to this specific edgebanding, which helps align front-office documentation with shop-floor material pulls. The 600 foot length recorded in the SAP description means a single roll can be used across many panels in a run, reducing material changeovers and helping keep color and edge thickness consistent across the entire project. The .018 inch thickness and 15/16 inch width specified together define how this banding will sit on the edge, so installers can plan trimming and finishing steps to achieve a predictable, uniform result.
Rehau 301674-816 is a PVC edge banding from Rehau, Inc. in the Edge Banding product class, so it is intended for finishing and covering raw panel edges on casework and similar projects.
The Rehau PVC edgebanding has a width of 15/16 inch and a thickness of .018 inch, which provides slight overhang on typical 3/4 inch panels for trimming to a flush finished edge.
The SAP description specifies a length of 600 feet, allowing the same edgebanding to be used across many panels or multiple projects before another roll is needed.
The SAP description lists CP20123 LAC as part of the product identification, giving an additional code that ties this specific Rehau PVC edgebanding to drawings or material schedules.
The 15/16 inch width provides extra coverage beyond a typical 3/4 inch panel, so the banding can be applied and then trimmed back cleanly without risking exposed substrate.
The manufacturer part 301674-816 uniquely identifies this Rehau PVC edgebanding, helping shops reorder the exact same material when matching existing work or maintaining standards.
This Rehau, Inc. PVC edge banding with manufacturer part 301674-816 and SAP description 15/16X.018 CP20123 LAC 600FT provides defined dimensions and a clear identification trail for repeat use. For projects that rely on consistent 15/16 inch by .018 inch edging across many panels, this 600 foot Rehau PVC edgebanding offers a single, clearly identified material choice under one part number.
Sold In: 1 Roll