Rehau PVC edgebanding provides an edge treatment for panels that covers exposed core material, so finished parts present a consistent look across cabinet and furniture components. This Rehau, Inc. product is listed as edge banding, so it is designed specifically for edging rather than structural use, which keeps it focused on finishing panel edges without adding bulk. The SAP description 15/16X.018 CP20317 LAC 600FT identifies a 15/16 inch wide strip at approximately .018 inch thickness, giving a slim profile that matches common panel edges while minimizing lip at the face. The 600FT length in the description indicates a continuous run suited to production or multi-job batches, helping a shop carry one roll through many parts. The PVC material reference in the name indicates a plastic edge solution, which supports a uniform, machinable edge surface around laminated or coated panels.
The 15/16X.018 CP20317 LAC 600FT SAP description identifies a 15/16 inch wide band, which overshoots a 3/4 inch panel edge slightly so trimming yields a flush edge. The .018 inch thickness in the same description denotes a relatively thin PVC layer, so the edge transitions closely to the face material when trimmed. The reference to CP20317 in the description identifies a specific design or finish code within the Rehau line, helping this edge banding align visually with matching panel surfaces when that code is used on project documentation. The 600FT length noted in the SAP description supports running multiple cabinets or casework runs from a single roll, which reduces changeovers on an edgebander and keeps setups focused on one material specification.
The Category designation Miscellaneous|Edgebanding and Product Class Edge Banding position this Rehau PVC edgebanding for use on cabinet, furniture, and casework panel edges, where a narrow strip finishes exposed substrate. The 15/16 inch width in the SAP description is suited to edging panels near nominal 3/4 inch thickness, giving coverage on both faces for subsequent trimming and flushing. The .018 inch thickness described there indicates a lean profile, so routed or trimmed edges follow panel corners closely without a pronounced step. The Rehau, Inc. branding ties the product to a manufacturer focused on edgebanding solutions, aligning this roll with typical woodworking and casework shop equipment.
The 15/16X.018 CP20317 LAC 600FT SAP description consolidates width, thickness, design code, and run length in one identifier, which simplifies specifying this exact edge banding on cut sheets and job packages. The 600FT length allows repetitive runs with the same material, helping projects maintain consistent edge appearance from the first cabinet to the last. The manufacturer part number 301674-818 connects the product name Rehau PVC Edgebanding, 301674-818 directly to ordering and inventory systems, so restocking aligns with the same specification already in use on shop floor equipment. The edge banding classification ensures the material is intended as a finishing strip on panel edges, supporting workflows built around edgebanders, trimmers, and related woodworking processes.
The SAP description 15/16X.018 CP20317 LAC 600FT indicates the edgebanding is about 15/16 inch wide and .018 inch thick, so it covers common panel edges with a slim profile for trimming.
The 600FT detail in the SAP description provides a long continuous run, letting shops process many parts or multiple cabinets before changing rolls during edgebanding operations.
The manufacturer part number 301674-818 designates this specific Rehau PVC edgebanding, helping purchasing and production reference the same material across projects.
The Category Miscellaneous|Edgebanding and Product Class Edge Banding classify it as edging for panel sides, aligning it with cabinet and furniture edge finishing tasks.
The CP20317 reference in the SAP description identifies a specific design or finish code, so drawings and job specs can call out this exact appearance and thickness.
This Rehau PVC edgebanding, 301674-818, is offered through Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry.
Rehau PVC edgebanding, 301674-818, aligns a named Rehau, Inc. edge banding with the 15/16X.018 CP20317 LAC 600FT specification, so shops can match panel edge treatment directly to drawings and material schedules. The Category Miscellaneous|Edgebanding and Product Class Edge Banding clarify its role as a finishing strip for cabinet, furniture, and casework edges rather than a structural component. The 600FT length and defined width and thickness support repeatable, consistent edging across multiple projects when ordered through Wurth Baer Supply.
Sold In: 1 Roll