Rehau PVC edgebanding gives you a PVC edge solution from Rehau, Inc. built for finishing exposed panel edges on cabinet and casework projects. The 15/16 inch width covers standard panel thicknesses while giving a little edge reveal to cleanly cover saw-cut or machined edges. The .018 inch thickness provides a thin edge profile that keeps the edge visually light, which suits many laminate and melamine jobs where a slimmer band is preferred. The 301674-958 manufacturer part number identifies this specific color and finish combination in the Rehau system so you can match it to existing work or project specifications. The CP20514 designation in the description further defines the color code so repeat orders track to the same appearance. With 600 feet per roll noted in the description, one roll supports long cabinet runs or multiple jobs before reordering, which helps reduce downtime between installs.
The 15/16X.018 dimension in the SAP description gives you a clear picture of how this Rehau PVC edgebanding will sit on your panels during application. At 15/16 inch wide, the band overhangs typical 3/4 inch panel thickness, leaving enough margin for trimming flush after bonding without fighting a short edge. The .018 inch thickness delivers a lean edge profile that transitions tightly to the panel face, which is helpful where clean lines and minimized edge build-up are part of the design intent. The 600 FT notation in the description signals a continuous roll length well-suited to production-style setups where long, uninterrupted runs are common, allowing you to keep the machine running across multiple cabinet boxes or casework sections.
The Rehau PVC edgebanding, 301674-958, sits in the Edge Banding class and Edgebanding category, which positions it for use on exposed board edges in cabinet, furniture, and general woodworking assemblies. The PVC material aligns with laminate and melamine panel construction, so it fits into workflows that already rely on engineered panels and decorative surfaces. The 15/16 inch width gives you coverage that works across vertical cabinet sides, shelves, and similar carcass components, supporting a single-width approach for much of the box work. Its .018 inch thickness lends itself to projects where a thinner edge band suits the design, such as modern casework or commercial fixtures that call for a subtle edge line. Because the SAP description carries the CP20514 LAC reference, the roll plugs into projects that specify that particular Rehau look, helping your shop stay aligned with project documentation.
The specific 301674-958 manufacturer part number on this Rehau PVC edgebanding helps you maintain consistency from one job to the next, since you can reorder the same item when a project or client standard repeats. The 15/16X.018 sizing supports predictable trimming and scraping across your runs, because the slight overhang and lean thickness combine to leave a manageable edge after the trimming pass. Working with a 600 FT roll format means longer intervals between roll changes during production, which helps keep your edgebanding machine or workflow moving with fewer interruptions. Classifying this product as Edge Banding and Edgebanding clearly defines its role in the assembly: it is there to close off raw board edges and visually tie panels together. Tying these details together, this Rehau PVC edgebanding supports repeatable, documented results whenever your work calls for the CP20514-coded finish.
Rehau PVC edgebanding 301674-958 is listed as 15/16X.018, giving you a 15/16 inch wide band at .018 inch thickness for covering typical panel edges.
The 600 FT length noted in the description supports long cabinet or casework runs, so you can edge many components before changing rolls.
The 301674-958 manufacturer part number identifies this exact Rehau PVC edgebanding variant so you can match color and finish to project requirements.
The CP20514 LAC reference in the SAP description designates the specific Rehau design or color family used for coordinating with drawings or prior work.
The .018 inch thickness produces a lean PVC edge that keeps the transition to the panel face subtle, suiting designs that call for a slim edge detail.
Rehau PVC edgebanding 301674-958, categorized as Edge Banding, suits cabinet, furniture, and casework projects needing finished panel edges in the CP20514 series.
This Rehau PVC edgebanding, 301674-958, combines a 15/16 inch width, .018 inch thickness, and 600 FT roll format to support efficient edge finishing on panel-based projects. The CP20514 LAC and part-number identification let your shop align material choice with specifications and previous work. For cabinet, furniture, or general casework built around engineered panels, this Edge Banding option from Rehau, Inc. provides a clearly defined, repeatable choice for closing off exposed edges with a consistent CP20514 look.
Sold In: 1 Roll