Rehau PVC edgebanding 301674-970 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cut board edges present a uniform, workable surface. The 15/16 inch width covers standard panel thickness with a bit of overhang, giving room to trim flush after bonding. The .018 inch thickness provides a slim edge profile that keeps the edge visually light while still adding a defined finished band around the panel. The CP40424 designation identifies the specific color or pattern series, so edges match the intended board surface in a consistent way across a run of parts. A 600 FT length supports longer production runs or multiple projects from a single roll, reducing roll changes on the edgebander and helping maintain steady workflow on repetitive cabinet or casework jobs.
This Rehau PVC edge banding is specified at 15/16 inch by .018 inch, so it is sized for common cabinet and casework panel edges and leaves modest excess for trimming after bonding. The slim .018 inch profile means less material stands proud of the panel before trimming, which helps edging equipment or hand tools bring the edge flush with fewer passes. The 600 FT designation in the description defines the roll length available for continuous runs, so production lines can feed long stretches of board edges without changing rolls as often during a job. Together, these dimensions support predictable feeding, trimming, and finishing of edges in a typical woodworking shop workflow.
This Rehau PVC edge banding belongs to the Edge Banding product class in the Wurth Baer Supply assortment, placing it in the group used to finish exposed panel edges on cabinets, furniture, and general casework. The 15/16 inch width makes it a practical choice wherever board thickness aligns with standard cabinet and shelving panels, because the banding can cover the full edge while still giving a small trimming margin. The CP40424 reference in the SAP description links the banding to a defined finish family, so fabricators matching that finish code can specify this exact part number to keep edges visually consistent from one job phase to the next. With 600 FT available on a roll, the material suits production runs where the same width and finish are required on many parts.
The combination of 15/16 inch width and .018 inch thickness in this Rehau PVC edge banding supports repeatable machining and finishing because equipment can be set up around fixed, known dimensions. The slight over-width gives operators a controlled amount of material to trim away, which helps trimming heads, scrapers, or hand tools deliver the same flush edge profile across many pieces. The .018 inch thickness keeps the edge light, so less material needs to be removed at corners and transitions, supporting smoother passes and more uniform joints where edges meet. Since the material is PVC, the banding responds consistently to cutting and scraping, making it well-suited to standard woodworking processes that rely on predictable chip formation. The 600 FT length in a roll also means a setup can stay in place for a larger batch, which supports consistent results across an entire production run that uses this exact 301674-970 code.
The 15/16 inch by .018 inch size defines the width and thickness of the Rehau PVC edgebanding, so fabricators can align it with panel thickness and trimming setups for clean, flush edges.
The 600 FT roll length gives shops enough Rehau PVC edgebanding to run many parts in one setup, which supports continuous edging on cabinet or casework jobs with fewer roll changes.
The CP40424 reference in the SAP description identifies the specific finish family for this Rehau PVC edgebanding, so users can tie edge material to a defined visual series when selecting parts.
This product is classified as Edge Banding because it is designed to cover and finish the exposed edges of panels, giving woodworking projects a defined and uniform border around cut edges.
The PVC material of this Rehau edgebanding provides a consistent, machinable surface, so standard edging tools can trim and scrape it to a smooth, even finish along cabinet or furniture edges.
The manufacturer part number 301674-970 uniquely identifies this Rehau PVC edgebanding, linking size and finish details so shops can specify or reorder the same edge material accurately.
Rehau PVC edgebanding 301674-970 from Wurth Baer Supply combines a 15/16 inch by .018 inch profile with a 600 FT roll length to support steady edge-finishing work. Using the CP40424 and 301674-970 identifiers ties your edge material to a known finish and size, so recurring cabinet or casework jobs can rely on the same look and setup. For shops standardizing on PVC edge banding dimensions, this part gives a defined option for exposed panel edges across multiple woodworking projects.
Sold In: 1 Roll