Rehau PVC edgebanding 301799-071 is PVC edge banding from Rehau, Inc. that provides a defined finish on exposed panel edges, giving casework, shelving, and cabinet parts a finished, uniform appearance. The 15/16 inch width stated in the SAP description gives coverage over common 3/4 inch panels with room for trimming, helping you hide the core and any slight overhang from laminates or veneers. The 1mm thickness described in the SAP description offers a substantial edge profile compared to thinner tapes, supporting a more solid feel on high-touch edges. The CP10040 reference in the SAP description identifies a specific Rehau design or program line, keeping visual and material selection consistent across a project when matching existing runs. The 600FT length in the SAP description provides a continuous supply for longer production runs, reducing roll changes during repetitive cabinet or fixture work.
The SAP description 15/16X1MM CP10040 EMB LAC 600FT confirms that this Rehau PVC edgebanding is supplied at 15/16 inch width, giving installers enough material to trim both sides of 3/4 inch panels for a flush, uniform edge. The same description states a 1mm thickness, which works well with common edgebanding equipment settings that are tuned for 1mm PVC, reducing adjustment time when switching between similar Rehau products. The 600FT length referenced in the SAP description indicates a long continuous run, which is useful for batching cabinet components or case parts without frequent material changeovers during processing.
The category listing as Edgebanding and Edge Banding shows that this Rehau 301799-071 product is intended for covering raw panel edges in woodworking and cabinet applications, so it fits naturally into cabinet shops, millwork, and fixture work that rely on PVC edges. The PVC material identified in the product name supports use on engineered panels such as particleboard or MDF when an impact-resistant synthetic edge is desired instead of exposed core. The 15/16 inch width from the SAP description gives working room on typical 3/4 inch substrate, fitting many cabinet sides, shelves, and vertical partitions that follow those nominal dimensions. The 1mm thickness referenced in the SAP description balances a noticeable edge profile with manageable trimming, fitting situations where a thin tape look is not desired but thicker heavy edges are not required.
The Rehau brand designation in the product data identifies the manufacturer as Rehau, Inc., giving shops a consistent PVC edgebanding source that pairs well with tooling and settings already proven on prior Rehau jobs. The specific manufacturer part number 301799-071 allows drawings, cut lists, and order sheets to call out the same PVC edgebanding every time, helping maintain color, finish, and performance consistency across repeat runs. The SAP description reference to CP10040 EMB LAC defines this edgebanding as part of a clearly coded line, so once machinery is dialed in for this code, operators can replicate feed, trim, and scrape settings confidently on future work using the same material. The 600FT length in the SAP description means fewer interruptions while feeding parts, supporting smoother throughput and more consistent heating and trimming conditions across long batches.
Rehau 301799-071 is PVC edgebanding classified as Edgebanding and Edge Banding, so it is used to cover exposed panel edges on cabinets, shelving, and similar woodworking components.
The SAP description 15/16X1MM confirms a 15/16 inch width and 1mm thickness, giving coverage for 3/4 inch panels with enough material for trimming to a flush finished edge.
The SAP description lists 600FT, so this PVC edgebanding provides a 600 foot length that supports extended production runs with fewer material changeovers at the edgebander.
The product data identifies the brand as Rehau, Inc., so this PVC edgebanding is manufactured by Rehau for use in woodworking and cabinet applications.
The 1mm thickness in the SAP description aligns with common PVC edgebanding settings, so shops running 1mm material can apply similar machine setups when processing this product.
The 15/16 inch width exceeds nominal 3/4 inch panel thickness, giving extra material for trimming both faces so cabinet and shelf edges finish flush and visually consistent.
The combination of Rehau branding, the specific manufacturer part number 301799-071, and the SAP description 15/16X1MM CP10040 EMB LAC 600FT ties this PVC edgebanding directly to a defined edge solution for woodworking projects. The 15/16 inch width, 1mm thickness, and 600FT length described in the SAP data support efficient processing on cabinet and casework lines that depend on consistent PVC edging. For jobs that call out this exact Rehau code, choosing this edgebanding keeps material, appearance, and machine setup aligned from one production run to the next.
Sold In: 1 Roll