Rehau PVC edgebanding 301799-086 15/16x1mm 600FT

Rehau PVC Edgebanding 301799-086 For Clean Panel Edges

Rehau PVC edgebanding 301799-086 is a PVC edge banding from Rehau, Inc. that finishes raw panel edges so cut board edges present a uniform, protected surface on cabinets, fixtures, and other woodworking jobs. The SAP description 15/16X1MM CP40819 EMB LAC 600FT defines a 15/16 inch wide, 1mm thick strip, giving enough coverage to cap common panel thicknesses with a solid margin for trimming. The CP40819 code identifies a specific decor reference, so matching repeat work or extending existing jobs stays consistent. The EMB LAC designation indicates an embossed lacquer surface, which adds a textured, coated finish that helps the edge read closer to a finished panel face in both look and feel. The 600FT notation specifies a 600 foot length, supporting longer runs and multiple cabinets from a single roll on shop edgebanders or hand-application setups.

Key Rehau PVC Edgebanding Details For Workflow

• The 15/16 inch width covers standard panel edges with some overhang, which allows trimming flush without exposing the core and helps keep seams tight on doors, drawer fronts, and casework.
• The 1mm thickness provides a defined edge profile compared with thinner tapes, which supports a more substantial edge line that holds up well when machining and handling completed parts.
• The CP40819 decor code ties this edgebanding to a specific finish reference, which simplifies reordering for repeat projects where visual continuity across batches and additional components matters.
• The embossed lacquer (EMB LAC) surface gives the PVC banding a textured, lacquered feel, which helps the edge transition visually from panel face to edge and supports a more finished presentation on visible edges.
• The 600 foot roll length reduces changeovers on edgebanding equipment, which keeps production moving on runs of cabinets, shelving, or casework that share the same CP40819 finish.

Edgebanding Size And Surface For Practical Installation

The stated 15/16X1MM dimension sets this Rehau PVC edgebanding up for straightforward installation on many engineered panels because the width covers common panel thicknesses while leaving room for trimming. That overhang window helps edgebanders and hand trimmers bring the edge down cleanly to the board face without chasing gaps. The 1mm body gives tools a bit more material to work with than thin tape, which supports a crisper edge after trimming and buffing. The embossed lacquer surface provides a textured, coated face that interacts predictably with trimming and scraping steps, helping the finished edge stay consistent along the full 600 foot length.

How This Rehau Edge Banding Fits Shop Use

Where Rehau 301799-086 PVC Edgebanding Works Best

This Rehau PVC edgebanding sits in the Edge Banding product class, placing it in the typical workflow for cabinet, fixture, and general woodworking edge finishing. The 15/16X1MM size suits many applications where sheet goods are cut to size and then edged on a bander or by hand, from kitchen cabinets to commercial casework. Because the CP40819 decor and embossed lacquer designation define a specific visual and surface feel, this banding supports projects where the edge needs to coordinate with a matching face decor from the same system. The 600FT length is well suited to production or high-volume shop environments, so a single roll can service a run of multiple cabinets, panels, or components without frequent changeovers during edging.

Why These Dimensions And Finish Support Repeatable Results

The 15/16 inch width on this 301799-086 edgeband gives consistent overhang on typical panel thicknesses, which helps machines track and trim the same way from piece to piece, reducing variation along doors and fronts. The 1mm thickness helps the edge present a defined radius or profile after trimming, which keeps the finished look uniform when job specs call for a visible PVC edge line. The CP40819 code and EMB LAC surface description keep color and texture tied to a defined standard, allowing shops to match previous work specified with the same reference. Over a 600FT length, that consistency in width, thickness, and surface helps maintain setup settings on edgebanders across many parts, supporting repeatable results and reducing rework tied to edge appearance.

Common Questions About Rehau 301799-086 Edgebanding

Select Rehau 301799-086 For Matching Panel Edges

The Rehau 301799-086 PVC edgebanding combines a 15/16X1MM profile, CP40819 decor, embossed lacquer surface, and 600FT length to support edge finishing on cabinet and woodworking projects. For jobs built around this specific Rehau reference, using this edge banding keeps edge dimensions, texture, and appearance aligned from piece to piece.