Rehau PVC edgebanding 301799-095 is a PVC edge banding from Rehau, Inc. that provides a finished edge on qualifying panel stock, giving casework, furniture, or fixtures a defined perimeter where raw core would otherwise show. The 15/16 inch width covers standard panel thickness with a small overhang, so trimming passes stay light while still hiding minor saw wander at the edge. The 1mm thickness gives enough material to handle typical edge rounding or light profiling without thinning through, supporting a consistent visual line along runs. The CP10081 embossed lacquer description identifies an embossed lacquered surface, which establishes a textured, coated face that can visually coordinate with appropriate decorative surfaces on doors, drawer fronts, or carcass parts. A 600ft length provides a long continuous run from a single roll, helping larger jobs stay on one lot code for uniform appearance across multiple cabinets or components.
The 15/16 inch width on this Rehau PVC edgebanding gives a small margin past typical panel thickness, which lets installers trim back to a clean flush line without exposing the substrate. The 1mm thickness works well where edges may receive routine handling, since the banding provides a defined shoulder that can accept light sanding or edge easing after trimming. Because the material is PVC edge banding, it fits into standard edgebanding processes in shops set up for this class of product. The CP10081 embossed lacquer surface designation points to a coated, embossed face that is intended to present as a finished edge once applied, so there is no separate facing step required after banding.
The Rehau PVC edgebanding, 301799-095, suits projects that require a defined finished edge on panels within the 15/16 inch coverage range, such as cabinetry, casework, and similar assemblies using edge banding. The 15/16 inch coverage dimension allows this banding to handle common panel thicknesses used in woodworking while leaving enough material for trimming operations, so installers can work confidently along long edges. The 1mm thickness supports applications where edges are part of the visual field, since the banding forms a noticeable edge detail rather than a thin veneer. Being part of the Edge Banding product class, it fits into jobs that standardize on discrete edging materials for doors, shelves, and carcass parts.
The CP10081 embossed lacquer designation on Rehau PVC edgebanding 301799-095 signals an embossed, lacquered surface that is prepared as a final-facing edge, reducing downstream finishing steps on applied edges. This textured, lacquered face helps the edge present in a controlled way under typical light, supporting visual continuity when adjacent to compatible surfaces. Because the surface is established at manufacture, edges from the 600ft roll share the same look across all cut lengths, which benefits jobs where multiple cabinets, panels, or fixtures need to read as one coordinated installation. The PVC construction, combined with the 1mm thickness, gives the lacquered, embossed surface a defined profile, so the finished edge reads cleanly at outside corners and along long straight runs.
Rehau 301799-095 is a PVC edge banding from Rehau, Inc., so it serves as a dedicated edging material for covering exposed edges on appropriate panel-based components.
This Rehau PVC edgebanding is 15/16 inch wide, giving coverage across standard panel thickness with slight overhang to support trimming back to a flush finished edge.
The Rehau 301799-095 edge banding is 1mm thick, providing enough material for light profiling or edge easing while maintaining a consistent visual band along the panel edge.
CP10081 embossed lacquer indicates the edge banding has an embossed, lacquered surface, so the face presents as a finished edge suitable for visible cabinet or furniture perimeters.
The Rehau PVC edgebanding, 301799-095, is supplied in a 600ft length, supporting extended runs where multiple parts need the same edging appearance across a project.
This product is classified under Edge Banding in the Miscellaneous|Edgebanding category, placing it within common woodworking and cabinetmaking material lines for panel edging tasks.
The Rehau PVC edgebanding 301799-095 pairs a 15/16 inch width with a 1mm thickness, giving panel edges generous coverage and workable material during trimming. The CP10081 embossed lacquer surface is prepared as a finished face, supporting visible cabinet, furniture, or fixture edges without additional facing steps. With a 600ft roll length, this Edge Banding product from Rehau, Inc. can carry a full run of components on a job, helping the finished edges read consistently from piece to piece. For projects built around PVC edge banding, this part number offers a clearly defined combination of width, thickness, surface description, and run length.
Sold In: 1 Roll