Rehau PVC edgebanding 301799-098 is a PVC edge banding from Rehau, Inc. that finishes and protects exposed substrate edges on cabinets, fixtures, and panels. The 15/16 inch width covers standard sheet material edges with enough margin for trimming, which helps installers flush the banding cleanly to both faces. The 1mm thickness gives a substantial edge profile that stands up to normal shop handling and everyday use on cabinetry. The CP20624 reference in the description identifies a specific color or design series, which helps match this edge banding to corresponding panel or door stock on repeat jobs. The EMB designation notes an embossed surface, so the edging presents a textured face that visually breaks up flat panel runs. The LAC reference indicates a lacquered finish on the PVC, giving the edge a finished look that is ready for install in visible locations.
This Rehau PVC edgebanding 301799-098 is described as 15/16 x 1mm, giving installers a clear read on coverage and edge build. The 15/16 inch width leaves workable overhang on both sides of typical casework materials, which supports clean trimming by hand or with edge-banding equipment. The 1mm thickness provides a predictable cut when flush trimming, so edges track square along cabinet runs. The EMB embossed surface designation means the banding carries texture through the full width, which matters when aligning the edge visually with textured door or panel faces. The LAC lacquered finish reference indicates that the surface is treated to present as a final facing layer once applied to cabinet components.
As a PVC edge banding in the Edgebanding product class, Rehau 301799-098 is suited to covering exposed edges on cabinet boxes, doors, drawer fronts, and panels. The 15/16 inch width works well on standard sheet goods where a slight overhang is preferred for later trimming, so cabinet sides and shelves finish flush and clean. In shop environments that run coordinated finishes, the CP20624 designation allows this edging to be matched to specific decorative surfaces, helping keep casework, fronts, and finished panels consistent across a job. The EMB embossed texture plays a role on vertical faces like tall cabinets and end panels, where light rake can highlight a structured surface instead of a flat, glossy strip. Because it is PVC edgebanding from Rehau, Inc., it fits into workflows that already specify Rehau design series across cabinets and fixtures.
The 1mm thickness on this Rehau PVC edgebanding 301799-098 gives the installer a sturdy edge to trim without chatter, which supports straight, repeatable passes along longer cabinet components. The 15/16 inch width allows small alignment shifts during application without risking core exposure after trimming, which helps reduce rework when running multiple panels in sequence. The EMB embossed texture designation means the edge profile can visually disguise minor handling marks better than a completely flat surface, which is useful on high-traffic cabinet faces. With the LAC lacquered reference, the surface is identified as a finished layer, allowing installers to treat the edge as part of the final visual field once trimming and cleaning passes are complete. The CP20624 series code ties this specific edgebanding to a defined design group, so replacement runs on later service calls can target the same identifier for consistent appearance across new and existing cabinet components.
Rehau PVC edgebanding 301799-098 is specified as 15/16 x 1mm, giving a 15/16 inch wide strip with 1mm thickness for edge coverage and consistent trimming.
The 15/16 inch width provides slight overhang on standard panels, allowing installers to trim back to a clean, flush edge without exposing the core material.
The EMB designation identifies an embossed surface, giving the PVC edgebanding a textured face that coordinates with structured panel finishes and reduces flat-sheen contrast.
The 1mm thickness on this Rehau PVC edge banding provides enough material for stable trimming passes, helping achieve straight, chip-free edges along cabinets and panels.
The LAC reference indicates a lacquered finish on the PVC surface, so the edge presents as a finished facing once installed on visible cabinet components.
The CP20624 code identifies the design series for this Rehau PVC edgebanding 301799-098, helping match edging to corresponding panels or replace existing runs accurately.
Choose Rehau PVC edgebanding 301799-098 when a 15/16 x 1mm PVC edge banding is needed to finish cabinet and panel edges with an embossed, lacquered surface. The defined CP20624 series, EMB texture, and LAC finish help align edging with coordinated casework designs. The combination of width and thickness supports efficient trimming, so cabinet, door, and drawer edges finish cleanly across production or retrofit projects.
Sold In: 1 Roll