Rehau PVC edgebanding 301799-104 15/16 x 1mm

Rehau PVC Edgebanding 301799-104 For Clean Edges

Rehau PVC edgebanding 301799-104 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they present a consistent, workable surface along cabinet and furniture runs. The 15/16 inch width stated in the SAP description gives coverage across typical 3/4 inch panels with a small overhang that can be trimmed for a flush, professional edge. The 1mm thickness described in the SAP data provides a substantial PVC layer that stands up to routine handling in woodworking environments. The CP20746 embossed lacquer designation in the description identifies a textured lacquered surface that helps panels match a specific decorative look while still remaining easy to wipe down in regular use. The 600FT length called out in the SAP description means longer, continuous runs can be covered from a single coil, reducing splice points along cabinet sides, shelves, or tall panels.

Practical Details That Support Edge Banding Work

• The 15/16 inch width in the SAP description spans standard 3/4 inch substrates with trim allowance, which lets installers route or scrape back to a clean line along doors, shelves, and casework edges.
• The 1mm thickness stated in the SAP description provides enough PVC material for solid edge coverage, giving fabricators a workable margin when flushing edges without cutting through to the core.
• The CP20746 embossed lacquer designation in the product description points to a textured lacquered face, helping fabricators line up panel faces and edges for a unified appearance on finished components.
• The 600FT length in the SAP description supplies a long, continuous run, which helps reduce seams along tall cabinets, closet panels, or long countertops where visible joints would break the visual line.
• The Rehau, Inc. brand name documented in the product data identifies a dedicated edge banding manufacturer, giving shops a consistent reference when repeating jobs or matching previous installations.

Edge Banding Size And Finish For Installation Fit

The 15/16 inch width documented in the SAP description gives fabricators a predictable overhang when applying this edge banding, so trimmers and hand tools can work against a uniform margin along panel edges. The 1mm thickness listed in the same description sets a consistent build at the edge, which helps maintain a smooth transition from face material to edge band without noticeable steps once trimmed. The CP20746 embossed lacquer reference defines the face texture and finish, allowing shops to coordinate this banding with panels that share the same decorative identification. The 600FT coil length described in the SAP data supports extended runs on production jobs, letting installers work from one part number across multiple cabinets or furniture pieces without frequent material changes.

Using This Rehau PVC Edge Banding In Woodworking

Where This 15/16 x 1mm Edgebanding Fits Best

The 15/16X1MM CP20746 EMB LAC 600FT description identifies this product as PVC edge banding suitable for covering exposed edges on panel-based construction in woodworking applications. With its 15/16 inch stated width, it suits common 3/4 inch panel builds used in cabinets, closets, and furniture carcasses that benefit from a small trimming allowance. The 1mm thickness specified in the SAP description positions this banding as a solid option where a more substantial edge is preferred over ultra-thin tapes, supporting applications that see frequent contact such as cabinet doors and drawer fronts. The CP20746 embossed lacquer detail provides a defined decorative reference, supporting projects where the edge needs to match or coordinate with a corresponding CP20746 surface on the panel faces.

Why These Rehau 301799-104 Details Matter In Use

The Rehau PVC Edgebanding, 301799-104 product name and Manufacturer Part # 301799-104 give shops a precise identifier, which supports reorders and job documentation when repeating a design or extending an installation later. The combination of 15/16 inch width and 1mm thickness documented in the SAP description helps edge banding equipment be set once and run consistently, because operators know the overhang and thickness they will trim every time. The CP20746 embossed lacquer designation in the SAP text ties this banding to a specific texture and finish family, so designers can call out this exact edge detail when coordinating multiple components in a room. The 600FT length listed in the SAP description reduces changeover for production environments, which supports smoother workflow on large runs of panels that all rely on the same edge treatment.

Key Questions About Rehau PVC Edgebanding 301799-104

Select Rehau 301799-104 For Defined Edge Treatments

The Rehau PVC Edgebanding, 301799-104 combines a 15/16 inch width, 1mm thickness, and CP20746 embossed lacquer surface as detailed in the SAP description, giving woodworking shops a defined edge solution for panel projects. The 600FT length specified in the SAP text supports production-oriented workflows where repeated runs of the same edge detail are needed. With a clear Manufacturer Part # 301799-104 and Rehau, Inc. branding, this edge banding fits buyers who want a specific, repeatable PVC edging identified by part number for cabinets, closets, and other panel-based work.