Rehau PVC edgebanding 301799-112 is a PVC edge banding designed to finish exposed panel edges so cabinets and furniture have a consistent, professional look. The 15/16 inch width covers standard 3/4 inch panels with enough margin to trim, which helps installers flush the edge after bonding without flashing the substrate. The 1mm thickness provides a solid edge profile, giving panels a substantial feel at corners while reducing the chance of telegraphing from minor substrate irregularities. The CP30266 designation identifies the specific decor or color series, supporting visual coordination across multiple components on the same project. At 600 feet per coil, this edgebanding supports longer production runs or multiple jobs from a single part number, reducing changeovers and simplifying material planning for shops.
The 15/16 inch by 1mm format sets clear expectations for machine setup, because feed, pressure, and trimming can be dialed to a known band thickness and overhang. This sizing works well where the substrate is 3/4 inch, giving a narrow overhang that trims quickly while still covering slight panel variation at the factory edge. Since the product is supplied as a 600 foot length, shops can load it once on compatible equipment and run multiple cabinets or closets in sequence, which keeps workflow moving without frequent coil changes.
As a Rehau PVC edge banding, part 301799-112 is suited to finishing straight panel edges in cabinetry, furniture, and other casework where exposed core needs to be covered. The 15/16 inch width is sized so it fully masks the face and edge junction of 3/4 inch sheet goods, which helps minimize visible glue lines and keeps the reveal consistent along tall cabinet sides or shelving. With a 1mm thickness, this banding sits between thin tape-style edges and heavier edges, giving designers a balanced look that is not overly bulky at doors and drawer fronts. The CP30266 EMB LAC designation points to a specific finish identity, so matching doors, panels, and fillers can share the same edge tone for a continuous appearance throughout a run of cabinets or fixtures.
The 1mm PVC construction of this Rehau edgebanding gives edgebanders and trimmers a stable thickness to work with, which supports consistent cutting geometry, scraper settings, and buffing passes from part to part. The 15/16 inch width keeps overhang limited, so less material needs to be removed at the top and bottom, which can reduce cycle time while still allowing fine tuning of flushness and radius. By tying the coil to a single manufacturer part number, 301799-112, shops can record exact settings once and apply them whenever this same band is used, helping operators repeat results across future jobs. The 600 foot length also means those dialed-in settings can be used across many panels before a roll change, which reduces interruptions on long cabinet or closet runs.
Rehau PVC edgebanding 301799-112 is 15/16 inch wide and 1mm thick, which suits 3/4 inch panels while allowing trimming for a clean, flush edge on cabinet parts.
The 1mm thickness provides a noticeable but moderate edge, which supports a solid feel along doors and panels while remaining easy to process on standard edgebanding equipment.
The 600 foot length allows longer production runs from a single coil, which reduces changeovers on edgebanders and supports consistent results across multiple cabinets or fixtures.
The CP30266 EMB LAC description identifies the decor for this Rehau PVC edge banding, which helps align edge material with matching panel finishes on coordinated projects.
Part number 301799-112 uniquely identifies this specific Rehau PVC edgebanding, which supports repeat ordering and consistent results when projects are updated or expanded.
The 15/16 inch width slightly overhangs 3/4 inch panels, which provides trimming allowance so edges can be finished flush and straight after bonding.
This Rehau PVC edgebanding 301799-112 combines 15/16 inch width, 1mm thickness, the CP30266 EMB LAC finish identity, and a 600 foot length to support steady cabinet and furniture production. For shops standardizing on a defined edge profile and decor, this single part number keeps ordering and setup aligned across panels, doors, and trim pieces.
Sold In: 1 Roll