Rehau PVC edgebanding 301799-113 is a PVC edge banding from Rehau, Inc. that covers and protects exposed panel edges, giving casework and cabinetry a finished look on visible sides. The 15/16 inch width works with common 3/4 inch panel construction, providing enough coverage to span the panel edge and a small overhang for trimming. The 1mm thickness creates a solid edge profile that stands up to regular contact in cabinet, furniture, or fixture applications. The CP30275 designation ties this edgebanding to a specific color or design match, helping projects stay visually consistent from part to part. This edgebanding is supplied in a 600FT length, supporting longer runs and repeated parts so shops can handle multiple cabinets or full room layouts from a single roll. As an edge banding product in the edgebanding category, it fits directly into standard woodworking workflows.
This Rehau PVC edgebanding 301799-113 is designated as 15/16X1MM in the product description, so it is sized for common panel work where a slightly oversized band is trimmed back after bonding. The 15/16 inch width gives coverage beyond the 3/4 inch panel edge, supporting straight and flush trimming passes along cabinet sides, tops, and fronts. The 1mm thickness offers a balance between a substantial feel and efficient machining, so edges can be shaped or lightly profiled while staying consistent from part to part. With a 600FT roll length identified in the description, shops can feed the same material through their edgebander or manual setup across a sequence of components, helping maintain alignment of thickness and design through the entire run.
The Rehau PVC edgebanding 301799-113 is identified as an edge banding in the edgebanding category, so it is intended for covering exposed edges on panel-based construction. The 15/16 inch width aligns with cabinet-grade sheet goods, allowing use on case sides, tops, bottoms, and vertical partitions where the core would otherwise show. The 1mm PVC construction fits well on cabinet doors and drawer fronts, where a defined edge thickness helps parts feel uniform across a kitchen, bath, or storage layout. The CP30275 designation connects the banding to a consistent Rehau appearance, supporting projects that rely on matched faces and edges in commercial or residential cabinetry. The 600FT length supports use on multiple rooms or fixture runs, so shops can carry one material through an entire job without appearance shifts.
The 15/16X1MM sizing on this Rehau 301799-113 PVC edgebanding defines both how it sits on the panel and how it processes after bonding, which matters when repeatable results are important. The 15/16 inch width gives enough overhang in both directions, so trimming equipment can remove a small, predictable excess and leave a clean, flush edge across doors, shelves, and cabinet sides. The 1mm PVC thickness means the banding has enough body to avoid a fragile edge, supporting uniform profiling or light edge easing where a consistent feel is needed on every touch point. Because the product description specifies a 600FT length, production teams can run long sequences of parts using the same roll, reducing material changes that might introduce slight visual or dimensional differences between early and late parts in a job.
The Rehau PVC edgebanding 301799-113 is designated as 15/16X1MM, giving a 15/16 inch wide, 1mm thick edge that covers standard 3/4 inch panels with trim allowance.
The 1mm thickness on this Rehau PVC edgebanding provides a solid edge that can be trimmed and lightly profiled while maintaining a consistent feel on doors and panels.
The CP30275 reference in the description identifies a specific Rehau design or color family, which supports projects that need coordinated faces and edges.
The 15/16 inch width gives slight overhang on each side of a 3/4 inch panel, allowing trimming equipment to cut back to a flush, finished edge.
This Rehau PVC edgebanding 301799-113 is described as 600FT, supporting longer production runs and multiple parts from a single roll.
Rehau 301799-113, classified as edge banding, is used on exposed panel edges in cabinet, furniture, and similar woodworking applications to cover the core.
The Rehau PVC edgebanding 301799-113 pairs a 15/16 inch width, 1mm thickness, and CP30275 design reference to support clean, coordinated panel edges on cabinet and furniture work. With a 600FT length noted in the description, it suits shops that need consistent edgebanding through extended runs and repeated layouts. As a PVC edge banding from Rehau, Inc. in the edgebanding category, it fits directly into standard woodworking processes when a defined Rehau design is required across faces and edges on a project.
Sold In: 1 Roll