Rehau PVC edgebanding gives panel edges a PVC finish that covers exposed core material so cabinet and furniture parts present a unified look from face to edge. This Rehau, Inc. edge banding is identified by manufacturer part 301799-115, helping shops match it to drawings, cut lists, or prior jobs that specify this exact Rehau number. The edgebanding is categorized as edge banding, so it is intended for finishing raw edges on panels rather than as a structural component. A listed size of 15/16 x 1mm provides a strip slightly wider than a nominal 3/4 inch panel, giving room for trimming so edges finish flush without showing the substrate. The SAP description references CP40244 EMB LAC, identifying a specific color or finish series so shops can align this banding with coordinating surfaces when that designation is on project documents.
The 15/16 x 1mm size of this Rehau edge banding is suited to panels near 3/4 inch thick, because the extra width allows trimming flush on both faces after application. Using a strip that is wider than the panel face reduces the chance of leaving a slight step at the edge, which can be noticeable under light. The 1mm thickness supplies enough PVC material to create a defined edge profile that responds well to standard trimming and scraping operations. Since the product is classified as edge banding in the edgebanding category, it is intended for use on panel edges where a durable, PVC-based edge treatment is specified on drawings or cut sheets.
The 15/16-inch width of Rehau PVC edgebanding, part 301799-115, is sized for use on panels around 3/4 inch thick, giving enough overhang on each side for trimming. This makes it practical for cabinet cases, shelves, and similar components that call for PVC edge treatment in that thickness range. The product is categorized specifically as edge banding, so its role is to finish cut panel edges rather than flat surfaces or structural joints. The CP40244 EMB LAC designation in the SAP description identifies a particular finish reference, which matters when project documentation specifies that same code and requires consistent appearance from part to part. A stated 600ft length supports runs where many edges share the same material, helping shops process a series of cabinets or fixtures without frequent material changes that slow throughput.
The 1mm thickness of this Rehau PVC edgebanding gives operators a predictable amount of material to trim and scrape, which supports consistent edge profiles across different parts in a batch. The combination of 15/16-inch width and 1mm thickness is a common working size for panels near 3/4 inch thick, so settings developed for this banding can often be reused whenever the same part number 301799-115 appears on new work orders. Because the SAP description clearly states CP40244 EMB LAC 600FT, shops can track this exact banding in their systems, tying remaining footage to specific jobs and reducing mix-ups with other finishes. Identifying the product as Rehau, Inc. edge banding also helps maintain consistency, as operators know they are working with the same PVC line each time this part number is pulled for production.
The Rehau PVC edgebanding 301799-115 is listed as 15/16 x 1mm, so it provides overhang on panels near 3/4 inch thick and enough thickness for standard trimming operations.
The 15/16-inch width gives extra material beyond the panel faces, allowing both sides to be trimmed back to a flush, clean edge without exposing the underlying core.
CP40244 EMB LAC in the SAP description identifies a specific finish reference, so shops can match this banding to projects that call out that same finish code.
The description lists 600ft, providing a long run of the same material so multiple cabinet or furniture components can be processed without frequent coil changes.
This Rehau product is classified as edge banding in the edgebanding category, so it is intended for finishing exposed panel edges on cabinets and related casework.
The 1mm thickness gives a substantial PVC edge that tolerates normal trimming and scraping, supporting a consistent finished profile across repeated production runs.
Rehau PVC edgebanding 301799-115 pairs a 15/16-inch width with 1mm thickness to finish panel edges around 3/4 inch while allowing clean trimming on both faces. The CP40244 EMB LAC reference connects directly to project specifications that call out this finish. With 600ft available under a single part number, shops can run multiple components using the same edge material and maintain consistent appearance from piece to piece. For work that specifies Rehau, Inc. edge banding and lists 301799-115 on drawings or cut lists, this product offers the matching PVC band needed to complete those panel edges.
Sold In: 1 Roll