Rehau PVC edgebanding 301799-120 15/16 x 1mm 600FT

Rehau PVC Edgebanding 301799-120 For Clean Edges

Rehau PVC edgebanding 301799-120 is a PVC edge banding product designed to finish exposed edges on panels in woodworking and cabinet projects. The 15/16 inch width covers standard panel thickness with a small overhang, giving material to trim back for a flush, consistent edge. The 1mm thickness provides a solid PVC edge that supports machining and trimming without feeling too bulky at the corner. The CP40691 EMB LAC designation identifies the specific color and texture family, helping align this roll with matching surfaces in a project line. Supplied in a 600FT length, the roll format supports longer production runs and repetitive edge work on multiple cabinets or panels. As an edge banding product from Rehau, Inc., this material fits into professional woodworking workflows that rely on consistent dimensions and traceable part numbers.

Key Rehau PVC Edge Banding Work Advantages

• The 15/16 inch width spans typical panel thickness with workable excess, so installers can trim both sides to flush and avoid exposing the substrate edge after finishing operations or light sanding.
• The 1mm thickness creates a substantial PVC edge, which supports clean trimming and profiling while offering a defined edge line that holds up during standard shop handling and machining.
• The CP40691 EMB LAC designation ties this edgebanding to a specific surface family, helping maintain visual continuity when panels and edges must coordinate across doors, drawer fronts, and casework runs.
• The 600FT roll length supports extended runs of cabinet or panel production, reducing changeovers between rolls and keeping edging steps moving efficiently in a shop workflow.
• The manufacturer part number 301799-120 provides a precise reference, helping shops reorder the same edgebanding when matching previous jobs or maintaining consistency across phased installations.

Edgebanding Dimensions That Support Straightforward Application

This Rehau PVC edgebanding uses a 15/16 inch width to give installers coverage across the panel edge with trim margin, which supports clean routing or scraping after bonding. The 1mm thickness balances rigidity with workable PVC mass, so trimming tools engage the edge predictably without excessive material removal. The PVC construction identifies the material type for shops setting temperatures and feed rates based on common PVC edgebanding behavior. Together, these dimensional and material details help edge-application processes remain consistent from piece to piece when this Rehau 301799-120 product is used across a run.

Using Rehau 301799-120 Edgeband In Woodworking Runs

Where This Rehau PVC Edgebanding Fits Best

This Rehau PVC edgebanding 301799-120 is identified as edge banding within the edgebanding category, positioning it for use on exposed edges of panels in woodworking and cabinet projects. The 15/16 inch width supports work on panels where the face material slightly exceeds nominal thickness, letting fabricators trim back for clean lines along doors, shelves, and case sides. The 1mm thickness means the edge presents a noticeable PVC band that can align with surrounding surfaces when the CP40691 EMB LAC appearance coordinates with panel finishes. With a 600FT roll length, this product fits well into shops running series of cabinets, casework sections, or repeated shelving where the same color and thickness must be carried through the entire set.

Why These Rehau Edgeband Details Matter In Production

The specified 15/16 inch by 1mm size allows fabricators to plan trimming passes knowing the edge banding provides both width and thickness suitable for common tools and jigs used on PVC edgebanding. The CP40691 EMB LAC reference ties the roll to a defined finish family, which matters when maintaining visual consistency across multiple components or matching prior installations using the same identifier. The 600FT length supports job planning, letting shops estimate how many linear feet of edging can be handled per roll without mid-run changeover. The clear manufacturer part number 301799-120 gives project managers and purchasing teams a single traceable ID for drawings, cut lists, and reorders, reducing mixups between different widths or finishes within Rehau PVC edge banding ranges.

Common Questions About Rehau 301799-120 Edgebanding

Select Rehau PVC Edgebanding 301799-120 For Consistent Edges

Rehau PVC edgebanding 301799-120 combines a 15/16 inch width, 1mm thickness, and CP40691 EMB LAC identification in a 600FT roll, giving woodworking and cabinet shops a clearly defined edge banding option. These verified details support planning, setup, and repeatable edge appearance across projects.