Rehau PVC edgebanding 301799-124 15/16 x 1mm

Rehau PVC Edgebanding 301799-124 For Clean Edges

Rehau PVC edgebanding 301799-124 is a PVC edge banding designed to finish exposed edges on panels so they present a uniform, protected surface on completed work. The 15/16 inch width covers common panel thicknesses while giving a small margin, helping installers trim flush without exposing the core. The 1mm thickness provides a solid edge profile that stands up well during handling and routine use. The CP40835 designation and embossed lacquer finish give the banding a specific texture and sheen that help match compatible decorative surfaces in the same program. Supplied in a 600 foot length, this edgebanding supports longer runs or multiple cabinet jobs from a single roll, which reduces changeovers during production. As a Rehau, Inc. edge banding product, it aligns with professional woodworking and cabinet shop applications that rely on consistent appearance across many parts.

Key Edgebanding Details That Support Shop Work

• The 15/16 inch width spans the edge and slight overhang, so installers can trim back to a clean line without risking a reveal of the core along the edge.
• The 1mm thickness creates a defined edge profile, giving parts a substantial feel while allowing standard trimming and scraping tools to work efficiently along straight or contoured edges.
• The CP40835 embossed lacquer surface delivers a specific texture and finish, which helps fabricators visually coordinate edges with matching decorative boards using the same surface program.
• The 600 foot roll length supports extended runs, allowing production teams to process many parts in sequence while keeping the edge color and texture consistent across the entire batch.
• The Rehau, Inc. branding identifies this edgebanding as part of a recognized edge banding line, which supports repeat ordering by part number when a project or program is specified around this finish.

Edgeband Size And Finish For Efficient Application

The 15/16 inch width on this Rehau PVC edge banding gives fabricators enough coverage to center the tape over the substrate edge and still retain a small trimming margin, which simplifies alignment at the edgebander. With a 1mm thickness, the banding balances ease of bending around standard cabinet components with a robust feel at doors, drawer fronts, and casework. The embossed lacquer CP40835 finish provides a defined look on the face of the banding, supporting precise visual transitions where the edge meets the panel surface. Over a 600 foot roll, that same finish and thickness repeat across every piece, which is important on jobs where doors, drawer fronts, and cases are installed side by side.

Using This Rehau PVC Edgebanding In Cabinet Work

Where This 15/16 x 1mm Edgeband Is Applied

This Rehau PVC edgebanding, identified by manufacturer part 301799-124, is intended for edging panel products in woodworking environments where a PVC edge is specified. The 15/16 inch width suits common panel constructions, so it can cover both the substrate edge and a controlled overhang for later trimming on automatic or manual equipment. Its 1mm thickness is well-suited to cabinet doors, drawer fronts, shelves, and casework edges where a stronger edge than thin tape is preferred. The CP40835 embossed lacquer surface aligns with decorative surfaces that share the same code, allowing shops to integrate this edge into coordinated casework programs. With 600 feet on a roll, it fits production settings that run repeated parts from the same color or texture set across projects.

How Dimensions And Finish Support Consistent Results

The 15/16 inch width helps operators position the banding quickly, because there is enough material to tolerate small alignment variations at the edgebander while still trimming to a clean, centered edge. A 1mm gauge behaves predictably when run through standard industrial or shop edgebanding equipment, which supports repeatable trimming and scraping settings from job to job. The embossed lacquer CP40835 finish provides a defined surface during finishing and inspection, making it easier for installers to see that the edge texture and gloss align with adjoining panels. The 600 foot roll length reduces the number of material changes during a production run, helping maintain color, texture, and process settings across many cabinet components without interruption.

Common Questions About Rehau 301799-124 Edgebanding

Select Rehau PVC Edgebanding 301799-124 For Matched Edges

Choose Rehau PVC edgebanding 301799-124 when a 15/16 inch wide, 1mm thick CP40835 embossed lacquer edge is specified for cabinets or casework. The defined dimensions, finish, and 600 foot roll length help support consistent, repeatable edging across coordinated projects.