Rehau PVC edgebanding 301799-151 provides a PVC edge banding solution for finishing exposed panel edges so cut board edges are covered during cabinet or furniture construction. The 15/16 inch width gives coverage across standard panel thickness with a small overhang, which supports trimming for a flush, professional edge. The 1mm thickness supplies a solid PVC layer at the edge, which supports an even surface for subsequent trimming operations. The CP40843 reference identifies a specific Rehau design and profile, which supports matching this edgeband to a defined decor program in the shop. The embossed lacquer finish described by EMB LAC indicates a textured, lacquered surface on the band, which supports visual coordination with embossed or lacquered faces on casework components. The 600 foot length in the description keeps a substantial run on a single reel, which supports longer production runs before a roll change is required.
This Rehau PVC edgebanding uses a 15/16 inch width, which gives coverage across the edge with enough surplus for trimming after bonding. The 1mm thickness creates a manageable balance between profile build and flexibility as the strip is applied. The description reference to EMB LAC points to an embossed lacquer surface, which provides a pre-finished appearance along the edge once bonded and trimmed. The CP40843 code links the band to a defined Rehau decor, which supports projects where edge and surface are coordinated during layout and installation. The 600 foot length described in the SAP information supports feeding through edgebanding equipment during repeated panel processing.
This Rehau, Inc. PVC edgebanding from Wurth Baer Supply is classified under edge banding and edgebanding, which positions it for use on exposed panel edges in woodworking environments. The 15/16 inch by 1mm format suits edge treatment on panels sized so that this width provides coverage and trim allowance, which is common on cabinet sides, shelves, and similar components. The CP40843 reference and embossed lacquer indication support applications where the edging is coordinated with a matching decor line, which is valuable on casework where faces and edges are kept visually consistent. The 600 foot roll length described in the SAP entry supports job sizes that move beyond small repairs into ongoing shop or production work.
The 15/16 inch width of this PVC edge banding provides predictable overhang during application, which supports consistent trimming without exposing the core. The 1mm thickness keeps a uniform profile at the edge, which supports steady feed and pressure settings on edgebanding equipment. The CP40843 identifier ties this material to a defined Rehau specification, which helps maintain repeatable appearance across multiple runs when the same decor is required. The embossed lacquer surface described by EMB LAC supplies a finished texture from the roll, which reduces additional finishing steps at the edge on coordinated projects. With a 600 foot length noted in the SAP description, shops can run multiple components or batches from the same roll, which supports consistent color and texture throughout the project.
Rehau PVC edgebanding 301799-151 is described as 15/16 inch wide and 1mm thick, which supports coverage with trim allowance and a consistent edge profile in cabinet and furniture work.
The CP40843 code in the SAP description identifies a specific Rehau design, which supports matching this edge banding to a defined decor program during project planning.
The EMB LAC notation indicates an embossed lacquer finish on the band, which provides a textured, lacquered edge appearance to coordinate with similar cabinet or furniture surfaces.
This Rehau PVC edgebanding uses a 600 foot length per the SAP description, which supports extended runs on edgebanding equipment during repeated panel processing.
Rehau 301799-151 is described as PVC edgebanding, which provides a plastic edge layer suited to covering exposed panel edges in woodworking projects.
The 1mm thickness provides a solid yet manageable PVC profile, which supports smooth trimming and a consistent finished edge on cabinets and related components.
This Rehau PVC edgebanding 301799-151 from Wurth Baer Supply combines a 15/16 inch by 1mm format, CP40843 decor reference, embossed lacquer surface, and 600 foot length so shop teams can match defined Rehau programs and process repeated cabinet or furniture edges with consistent results.
Sold In: 1 Roll