Rehau PVC edgebanding provides a PVC edge banding solution that covers and protects raw board edges, so cabinet and furniture panels gain a finished appearance and a defined edge profile during assembly. The 15/16 inch width from the 15/16X1MM CP41324 EMB LAC 600FT specification gives coverage across standard panel thicknesses with a bit of overhang, which supports flush trimming for a tight, professional-looking edge. The 1mm thickness in the same specification adds enough material for shaping and trimming, helping the edge hold its profile in everyday shop use. The CP41324 designation identifies the specific design and texture, so matching existing runs or planning consistent jobs becomes straightforward. The embossed lacquer reference in EMB LAC indicates a textured, lacquered surface on the PVC, which helps panels visually align with decorative surfaces while keeping the band easy to wipe during routine shop or job-site cleanup. The 600FT length called out in the description offers an extended run of material, which supports longer production runs and reduces mid-job material changeovers.
The 15/16 inch width on this Rehau PVC edgebanding gives fabricators a bit of extra coverage beyond typical panel thickness, so they can align the strip quickly, then trim it back without exposing core material. The 1mm thickness described in the specification works well when running the banding through edgebanders or performing manual trimming because there is enough PVC to scrape or lightly profile without cutting through. The embossed lacquer surface referenced by EMB LAC provides a finished face on the band as it is applied, so installers can bring panels straight from banding to assembly while maintaining consistent surface sheen and texture along the edge.
This Rehau, Inc. product identified as Rehau PVC edgebanding, 301799-159, belongs to the Edge Banding product class, so it is intended to finish exposed edges on panels in woodworking and cabinet applications. The 15/16 inch width from the 15/16X1MM CP41324 EMB LAC 600FT description gives coverage across common panel cores used in casework, allowing a small margin for trimming along both faces. That extra width helps builders handle slight panel size variation while still delivering a clean, straight edge line. The 1mm thickness mentioned in the same specification supports everyday cabinet and fixture work where the edge may experience repeated contact, because the band retains a noticeable, uniform profile after trimming.
The CP41324 code in the specification defines the visual style used for this PVC band, so shops can specify the same code on drawings or cut lists when they want consistent appearance across new builds or repairs using this exact material. The embossed lacquer (EMB LAC) surface treats the visible edge with a textured lacquered finish, which pairs with decorative laminates or surfaces that call for a similar sheen and tactile feel. In practical terms, that finish helps keep the edge looking integrated with the panel face, supporting uniform appearance across doors, drawer fronts, and cabinet cases.
The 15/16 inch by 1mm sizing in the 15/16X1MM CP41324 EMB LAC 600FT description gives installers predictable dimensions to work with, which makes machine setup and manual trimming more repeatable from part to part. Knowing the band is 1mm thick allows a consistent trimming allowance on edgebanders and hand tools, reducing the likelihood of cutting into the panel surface during cleanup passes. The continuous 600FT length referenced in the specification supports longer production runs of doors, shelves, and carcass parts without changing rolls, which is helpful when dialing in edgebander settings for a specific material and running many parts at once.
The embossed lacquer surface from the EMB LAC designation means the exposed edge already carries a lacquered, textured finish as it is applied, so there is no need to build that texture separately along the edge. That surface treatment helps ensure that once the edge is trimmed, the band presents a uniform look along the entire run, which is valuable when aligning cabinet fronts in banks or matching multiple units on the same project. Together, the defined width, thickness, surface code, and roll length give shops a predictable PVC edgebanding that supports consistent fit, trimming behavior, and visual result across repeated cabinet and furniture jobs.
Rehau PVC edgebanding with 15/16X1MM sizing uses a 15/16 inch wide, 1mm thick strip, so it covers standard panel edges with trim allowance and offers enough material for clean profiling.
The CP41324 designation identifies a specific design and surface pattern, so shops can call out this exact code on drawings to match existing work or maintain consistent appearance across projects.
The embossed lacquer (EMB LAC) surface gives the PVC edgeband a textured, lacquered finish, providing a furniture-like edge appearance that aligns with decorative panel faces.
The 600FT length listed in the specification allows longer production runs, so once machines are set for this PVC edgeband, many parts can be processed without changing material.
The 1mm thickness in the 15/16X1MM CP41324 EMB LAC 600FT description provides enough PVC for trimming and light profiling, helping the edge hold its profile in everyday cabinet use.
Rehau PVC edgebanding, 301799-159, is classified as Edge Banding, making it suitable for finishing exposed panel edges in woodworking, cabinetry, and furniture construction.
Rehau PVC edgebanding, 301799-159, combines a 15/16 inch width, 1mm thickness, and CP41324 embossed lacquer surface in a 600FT roll, so shops get predictable dimensions, defined appearance, and extended run length for cabinet and furniture edge finishing through Wurth Baer Supply.
Sold In: 1 Roll