Rehau PVC edgebanding 301799-166 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so cabinet and furniture projects present a consistent, professional edge instead of raw substrate faces. The 15/16 inch width stated in the SAP description gives coverage across typical 3/4 inch panels with overhang to trim, which supports tight, flush edges after trimming passes. The 1mm thickness identified in the SAP description provides a defined edge profile that stands up better than very thin tape, helping edges feel solid in everyday use. The CP21049 reference in the SAP description identifies a specific design or color family within Rehau PVC edgebanding, so multiple pieces in the same project keep a uniform appearance when matched. The 600ft length in the SAP description gives extended run capacity on a single roll, which reduces changeovers on repetitive cabinet or casework runs.
The 15/16 inch width documented in the SAP description gives installers extra material beyond a typical 3/4 inch panel, which allows slight panel variation while still trimming back to a precise, flush edge. The 1mm thickness from the SAP description works well with common edgebander settings, so feed pressure and trimming knives can be dialed in for repeatable passes without changing to ultra-thin or extra-thick programs. The PVC composition called out in the product name responds to heat and pressure during bonding, which supports use with standard industrial or serious DIY edgebanding equipment. The 600ft length in the SAP description minimizes roll changes over long runs, so once settings are established the line can keep running with fewer interruptions.
The Edge Banding product class designation confirms that Rehau PVC Edgebanding, 301799-166 is intended for finishing exposed edges on panels in cabinet, furniture, or similar panel-based construction. The 15/16 inch width listed in the SAP description suits projects using panels around 3/4 inch thick, so typical case sides, shelves, and fronts can be covered with trim allowance on both faces. Because the material is described as PVC in the product name, it is suited to applications where heat-applied edgebanding is standard, such as production cabinet lines or dedicated edge-banding stations in woodworking shops. The CP21049 EMB LAC code in the SAP description identifies a specific finish within Rehau offerings, which helps designers and builders align this banding with chosen decorative surfaces for a coordinated final look across multiple components.
The 1mm thickness specified in the SAP description gives the edge band enough body for consistent trimming, so knife heads or flush-trim bits engage a stable profile rather than a flimsy strip. This thickness helps reduce tear-out at corners when trimming and scraping, supporting smoother, more uniform lines on cabinet doors and casework edges. The 15/16 inch width defined in the SAP description gives predictable overhang, which simplifies machine setup because the same reference offset can be used for repeated cuts along long panel runs. The 600ft roll length in the SAP description means extended continuous feeding, so once edge-bander settings are dialed in, the operator can process a substantial number of parts under identical conditions. The manufacturer part number 301799-166 ties directly to this exact configuration, which supports repeat ordering for ongoing production where identical edge appearance and thickness are required across batches.
Rehau PVC Edgebanding, 301799-166 is classified as Edge Banding, so it is used to finish and protect exposed panel edges in cabinet and furniture construction.
Rehau PVC Edgebanding, 301799-166 is described in the SAP description as 15/16 inch wide and 1mm thick, giving trim allowance and a substantial edge profile for machining.
Rehau PVC Edgebanding, 301799-166 is listed with a 600ft length, allowing longer continuous runs on an edgebander and reducing time lost to roll changes during repetitive work.
Rehau PVC Edgebanding, 301799-166 uses the CP21049 EMB LAC code in the SAP description, indicating a defined appearance so multiple parts share the same look.
Rehau PVC Edgebanding, 301799-166 is described as PVC in the product name, so it is suited to heat-applied edgebanding processes commonly used in woodworking.
Rehau PVC Edgebanding, 301799-166 uses a 1mm thickness per the SAP description, providing a solid edge that trims cleanly and feels substantial on finished panels.
Rehau PVC Edgebanding, 301799-166 combines a 15/16 inch width, 1mm thickness, and 600ft length described in the SAP entry to support efficient cabinet and furniture edge work. The Edge Banding product class and PVC material in the name position it well for heat-applied processes in professional or serious DIY shops. The defined CP21049 EMB LAC designation in the SAP description helps maintain a coordinated appearance across multiple components in a project. For projects that match these dimensions and material needs, this Rehau PVC edgebanding offers a clearly defined option for repeatable, consistent edge finishing.
Sold In: 1 Roll