Rehau PVC edgebanding, 301799-177, is a PVC edge banding that covers and protects raw panel edges so finished surfaces match cleanly across the job. The 15/16 inch width gives coverage over common panel thicknesses, helping installers hide core material while keeping a straight visual line along cabinet and furniture edges. The 1mm thickness provides a solid band of PVC that stands up to typical shop handling and on-site installation without feeling flimsy during trimming or routing. The CP20776 EMB LAC finish identifies this as an embossed lacquer style, giving the edge a defined surface texture and sheen that works with matching decorative faces. A 600ft length per roll supports longer production runs or multiple rooms from one SKU, which reduces changeovers during banding work and keeps edge appearance consistent from cabinet to cabinet.
The 15/16 inch width on Rehau 301799-177 gives installers enough coverage to band common panel thicknesses while leaving a controllable overhang for trimming tools. That extra margin helps keep glue-line exposure and chip-out at the edge to a minimum. The 1mm PVC thickness adds body during feed and trimming, which helps the tape track straight along the panel and gives routers or trimmers a stable surface to ride on. The CP20776 EMB LAC embossed lacquer surface provides a defined appearance that remains readable at the edge, which matters when aligning cabinet fronts and doors to a specific decorative style. With 600ft per roll, shops can run multiple cabinet banks or furniture pieces in one setup, keeping both workflow and edge appearance consistent across the project.
Rehau PVC edgebanding 301799-177 is a PVC edge banding intended for covering exposed edges on panel-based components such as cabinet parts, casework elements, shelving, and similar assemblies. The 15/16 inch width is sized for use on panels where the finished face needs a coordinated edge that fully masks the substrate. Shops can run the 600ft roll through compatible edge banding equipment to handle series production, or pull from the same length for smaller batches while maintaining a uniform look. The CP20776 EMB LAC embossed lacquer finish gives the edge a defined texture that reads consistently around doors and along runs of cabinets, helping keep visual alignment tight across multiple pieces on the same wall or installation.
The 1mm thickness of this Rehau PVC edgebanding provides a stable band that resists folding during feed, which supports smoother tracking through edge banding machines or manual application tools and reduces rework from misaligned edges. The 15/16 inch size allows installers to position the band with slight overhang on both sides, then trim back to a clean line without exposing the core, which is important on high-visibility cabinet fronts and shelving edges. The CP20776 EMB LAC embossed lacquer surface contributes to a controlled appearance along seams, so when doors line up side by side, the edges share the same texture and sheen. With a 600ft roll, production teams can edge multiple rooms or a full run of casework from one continuous supply of PVC edgebanding, which helps keep color and finish uniform from the first cabinet to the last.
Rehau 301799-177 is a PVC edge banding used to cover and protect exposed panel edges, giving cabinets and other panel components a coordinated finished look.
This Rehau PVC edgebanding is 15/16 inch wide, providing coverage over common panel thicknesses and leaving enough overhang to trim back to a clean finished edge.
The 301799-177 edge banding is 1mm thick, giving the PVC enough body to feed smoothly and trim cleanly while still conforming to typical panel edges.
CP20776 EMB LAC indicates an embossed lacquer finish, so the edge has a defined texture and sheen that coordinates with matching decorative surfaces.
This Rehau edge banding roll is 600ft long, supporting extended cabinet or casework runs while keeping color and finish consistent across multiple parts.
The 1mm PVC edgebanding thickness balances flexibility and stability, helping it track well through equipment and produce a solid, uniform edge on finished panels.
Rehau PVC edgebanding 301799-177 combines a 15/16 inch width, 1mm thick PVC, and a CP20776 EMB LAC embossed lacquer finish to handle panel edge coverage where appearance must match the decorative surface. The 600ft roll length supports shops that want uninterrupted runs and repeatable results across multiple jobs. For cabinet, casework, or shelving projects that call for this specific Rehau 301799-177 identification, this PVC edge banding offers a defined way to keep exposed edges protected and visually consistent from part to part.
Sold In: 1 Roll