Rehau PVC edgebanding 301799-178 is a PVC edge banding from Rehau, Inc. that covers and protects exposed panel edges, so cabinet and furniture projects present a finished face instead of raw substrate. The 15/16 inch width spans typical 3/4 inch panels with margin for trimming, giving working room during application and flush trimming. The 1mm thickness provides a solid edge profile that stands up to routing and sanding steps without breaking through. The CP20838 designation identifies a specific decor match, helping maintain consistent appearance across multiple components on the same job. The EMB description indicates an embossed surface that adds texture along the edge, which visually breaks up flat runs and supports design details. The LAC description indicates a lacquered finish on the banding surface, so the edge arrives pre-finished for use in projects that match that surface look.
The 15/16 inch width on Rehau PVC edgebanding 301799-178 gives extra coverage beyond typical 3/4 inch panels, so installers can position the banding without tracking tight to the panel edge. The 1mm thickness provides enough body to register well against trimming tools, which supports straight, chip-free edge passes. The lacquered (LAC) surface means the visible face of the banding is already finished, so once bonded and trimmed, the edge aligns with lacquer-style panel faces used in the project. The embossed (EMB) description signifies that the surface is textured, so edges visually coordinate with panels and components that share that style within the CP20838 decor family.
Rehau PVC edgebanding 301799-178 serves as edge banding in cabinet, furniture, and woodworking builds where PVC edges are preferred. The 15/16 inch by 1mm size works with panel-based construction that uses sheet goods, so exposed edges on sides, shelves, and tops can be covered. The CP20838 decor designation positions this banding within a defined visual family, which matters when projects carry the same color or pattern across multiple pieces. The embossed surface (EMB) adds tactile character along doors, drawer fronts, and carcass edges, supporting designs that call for texture instead of a smooth band.
The 1mm thickness on this Rehau PVC edgebanding gives a dependable reference for trimmers and routers, so operators can work along the edge without the banding flexing excessively. The 15/16 inch width leaves enough overhang on both faces of a 3/4 inch panel, which helps maintain alignment during pressing before flush trimming. The lacquered (LAC) surface means the decorative face of the banding is ready to match lacquer-oriented designs, so the finished edge appearance stays consistent with the specified decor. The CP20838 decor code and 301799-178 part number together provide a clear reference, which aids shops in repeating the same look on add-on pieces and replacement components over time.
Rehau PVC edgebanding 301799-178 is 15/16 inch wide and 1mm thick, which covers typical panel edges and provides enough material for trimming to a flush, finished edge.
The CP20838 code on this Rehau PVC edgebanding designates a specific decor, helping maintain the same visual pattern across multiple cabinet or furniture components.
Rehau PVC edgebanding 301799-178 is described as EMB LAC, meaning it has an embossed texture and a lacquered surface that present a textured, prefinished edge appearance.
The 1mm thickness on this PVC edge banding provides a solid profile, so trimming and light sanding steps can be performed while maintaining a defined, durable edge line.
The 15/16 inch width gives coverage beyond standard 3/4 inch panels, allowing a bit of overhang that supports easier alignment and clean flush trimming on both faces.
The manufacturer part number 301799-178 identifies this exact Rehau PVC edgebanding configuration, tying size, decor, and finish together for ordering and repeat jobs.
Rehau PVC edgebanding 301799-178 from Wurth Baer Supply provides a 15/16 inch by 1mm PVC edge banding in the CP20838 decor with an embossed, lacquered surface. That combination gives shops a defined size and finish to match textured, lacquer-style panel designs. Using the 301799-178 and CP20838 identifiers when planning cabinet or furniture runs keeps edge appearance aligned across doors, fronts, and carcass parts. For work that depends on repeatable, coordinated edges, this Rehau PVC edgebanding 301799-178 offers a consistent, decor-matched solution.
Sold In: 1 Roll