Rehau PVC edgebanding 301799-184 15/16x1mm 600FT

Rehau PVC Edgebanding 301799-184 For Clean Edges

Rehau PVC edgebanding 301799-184 is a PVC edge banding that finishes exposed panel edges, so cabinet and furniture projects present a uniform, professional edge instead of raw board. The 15/16 inch width stated as 15/16X1MM in the description gives coverage across typical 3/4 inch panel edges with extra material to trim, which supports tight, flush edges after machining. The 1mm thickness noted in the SAP description adds material for a solid edge profile, which helps edges resist everyday bumps better than thinner skins. The CP40889 reference in the description identifies the specific decorative and color program, which lets shops keep visual consistency across repeat jobs using the same code. The EMB LAC notation indicates an embossed lacquer surface on the PVC, which provides a textured, finished look that aligns with modern panel surfaces and helps projects look planned as a system.

Key Edgebanding Details That Support Shop Work

• The 15/16 inch width described as 15/16X1MM spans standard panel edges with extra to trim, which makes it easier to achieve clean, flush edges after edge-bander or hand-trim passes.
• The 1mm thickness called out in the SAP description adds a measurable edge profile, which supports a sturdier feel at cabinet doors, drawer fronts, and shelving edges under regular use.
• The PVC material identified in the product name forms a consistent, machinable edge, which helps trimming tools cut smoothly and supports repeatable results across longer production runs.
• The CP40889 code in the description ties to a defined decorative program, which helps match edging appearance from job to job when the same reference is specified on drawings or cut lists.
• The EMB LAC notation signals an embossed lacquer surface on the PVC, which provides a textured finished face so visible edges coordinate with contemporary laminate and panel designs.
• The 600FT length stated in the SAP description provides a long continuous run, which reduces changeovers during production runs and supports consistent color and texture across many parts.

Edgebanding Size And Surface For Straightforward Application

The 15/16X1MM dimension for Rehau PVC edgebanding 301799-184 sets it up well for standard 3/4 inch board work, because the extra width gives trimming room on both faces. That extra margin lets automatic edge banders or handheld trimmers remove slight overhang while still leaving full coverage, which supports a clean line down the cabinet side. The 1mm thickness keeps the edge substantial, so profiles stay defined after trimming and light sanding. The EMB LAC designation describes an embossed lacquer surface on the PVC, which creates a finished, textured face that stays consistent along the 600FT length and supports uniform appearance on banks of doors or panels.

Where This Rehau PVC Edgebanding Fits Best

Using 15/16X1MM Edgebanding On Panels

Rehau PVC edgebanding 301799-184, described as 15/16X1MM, matches well with casework and furniture built from sheet goods where edges need a finished look. The 15/16 inch width overlaps a 3/4 inch board edge, giving latitude for slight panel thickness variation while still covering the substrate edge, which helps prevent thin reveal lines at the core. On cabinet sides, shelves, and door edges, the 1mm thickness forms a noticeable edge radius after trimming, which supports a solid-feeling front when doors and drawers are handled repeatedly. The CP40889 code directs shops to the same decorative program each time, so replacement doors or follow-up jobs can align visually with earlier runs that used this edging.

Why EMB LAC And Roll Length Support Workflow

The EMB LAC detail on Rehau PVC edgebanding 301799-184 points to an embossed lacquer surface, which gives the edging a textured finished face that coordinates with contemporary panel finishes. That surface treatment keeps the edge from looking flat compared to structured laminates, which matters when doors and panels are viewed together in a bank. Across the 600FT length stated in the SAP description, that same EMB LAC surface and CP40889 decorative reference remain consistent, so long cabinet runs and multiple cabinets in a project share the same look. For production shops, the combination of 600FT length and 15/16X1MM format means fewer roll changes during a batch, which helps maintain alignment and setup through a run of doors, drawer fronts, and shelves using the same edging.

Common Questions About Rehau 301799-184 Edgebanding

Select Rehau PVC Edgebanding 301799-184 For Your Job

Rehau PVC edgebanding 301799-184 combines a 15/16X1MM size, CP40889 decorative reference, EMB LAC embossed lacquer surface, and 600FT length to support consistent, finished edges across cabinet and furniture work. For projects that call for PVC edge banding in this dimension and decorative program, this Rehau, Inc. edge banding provides the defined size, surface detail, and run length needed to align shop setups and visual results across multiple parts and repeat jobs.