Rehau PVC edgebanding 301799-189 is a PVC edge banding designed to finish and protect exposed panel edges in woodworking and cabinet projects. The 15/16 inch width covers standard panel thicknesses with a bit of overhang, giving room for trimming flush after application so edges sit tight and clean against the panel. The 1mm thickness provides a substantial edge profile that stands up to typical shop handling and everyday use in finished installations. As an edge banding from Rehau, Inc., it aligns with common panel processing workflows in professional shops that run banders or hand apply edgebanding on site. The PVC construction supports consistent cuts and trimming during fabrication, so installers can work edges without the material breaking away at the corners. This Rehau PVC edgebanding 301799-189 ties into cabinet, furniture, and fixture builds where a matching, uniform edge detail is part of the finished look.
This Rehau PVC edgebanding, identified as 15/16X1MM in the SAP description, balances coverage and workability for cabinet and panel edges. The 15/16 inch width is sized to span typical panel thicknesses while giving installers trimming allowance along the front and back edge, which is important when banding both solid and composite cores. The 1mm thickness offers a measurable edge that can be flushed and lightly profiled without losing the banding line, supporting clean transitions where edges meet adjacent components. Being categorized as Edge Banding under Edgebanding, it fits into standard cabinet and woodworking installation sequences where edging operations follow cutting and boring. These dimensions help maintain predictable results when projects involve multiple identical panels that must line up visually once installed.
As Edge Banding in the Edgebanding category, this Rehau PVC edgebanding 301799-189 is suited to covering exposed edges on cabinet boxes, shelves, doors, and furniture panels in woodworking settings. The SAP description 15/16X1MM CP41208 EMB LAC 600FT shows it is dimensioned for typical panel stock, making it practical for runs of casework or fixture components that share a common thickness. In professional shops, the 600 foot length facilitates edging multiple units in a series without frequent material changes, which helps maintain consistency across a job. For serious DIY users working with sheet goods, the 15/16 inch width and 1mm thickness give a defined edge detail that can match many modern build styles. The PVC material supports routine machining steps such as cutting panels to length after edging, important when parts are trimmed to final size late in the workflow.
The manufacturer part number 301799-189 ties this Rehau PVC edgebanding directly to a specific combination of dimensions and appearance, which helps shops repeat the same edge detail from one project to the next. The CP41208 and EMB LAC references in the SAP description provide a precise internal description within Rehau and the distributor system, supporting consistent reordering when a project standard is set. The 15/16X1MM sizing gives installers predictable behavior when running parts through an edgebander or trimming by hand, because the overhang and thickness remain constant across the full 600 foot length. Being listed by Wurth Baer Supply under Miscellaneous | Edgebanding positions the product within a broader range of panel-processing materials, so it can be specified alongside laminates and other surfacing components on the same job. Together, these verified details help reduce variation in finished cabinet and fixture edges across multiple builds.
Rehau PVC edgebanding 301799-189 is described as 15/16X1MM, meaning it is 15/16 inch wide and 1mm thick, giving installers coverage and a workable edge profile.
This Rehau PVC edgebanding is specified at 600FT, supporting long cabinet or panel runs so shops can edge many parts in sequence with fewer material changeovers.
Rehau PVC edgebanding 301799-189 is classified as Edge Banding in the Edgebanding category, used to finish and protect exposed panel edges in woodworking projects.
This Rehau PVC edgebanding is applied to cabinet and panel edges, then trimmed flush so doors, drawer fronts, and cases present a clean, finished perimeter.
The CP41208 reference identifies a specific style within the Rehau PVC edgebanding line, giving specifiers a repeatable choice when standardizing cabinet edge details.
This Rehau PVC edgebanding 301799-189 is offered by Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry.
Rehau PVC edgebanding 301799-189 pairs a 15/16 inch width with 1mm thickness and a 600 foot length to support cabinet and panel edging in professional and serious DIY shops. The defined manufacturer part number and CP41208 style reference give specifiers a clear, repeatable option when matching existing work or setting standards for new projects. Sourced through Wurth Baer Supply, it aligns with a full range of woodworking materials, helping integrate edge treatment into broader cabinet, furniture, and fixture builds. Select this Rehau edge banding when a consistent PVC edge detail is needed across multiple panels or project phases.
Sold In: 1 Roll