Rehau PVC edgebanding 301799-190 is a PVC edge banding product that covers and protects raw board edges, so cabinet and furniture projects get a finished perimeter that stands up better in everyday use. The 15/16 inch width provides coverage over typical 3/4 inch panels with room to trim flush, which helps installers hide minor alignment variation and produce straight edges. The 1mm thickness gives the banding a solid edge profile, which supports smoother trimming and less chipping when machining. The CP40827 designation identifies a specific decor match within the Rehau line, so shops can pair this banding with coordinated surfaces in the same program. The embossed surface adds texture to the edge, which reduces visible handling marks and helps the edge read closer to the face material pattern. The lacquered finish provides a sealed surface, which supports a more uniform appearance along long cabinet runs.
The 15/16 inch by 1mm sizing on Rehau PVC edgebanding 301799-190 gives installers usable overhang on 3/4 inch board, which simplifies alignment on the edgebander and allows post-trimming to a clean, flush finish. The 1mm thickness works well with common trimming tools, which supports predictable cutting pressure and helps avoid edge blowout on standard cabinet materials. The embossed lacquered CP40827 surface arrives with texture already formed into the PVC, so the edge presents a consistent look across multiple panels in the same job. The lacquer coat on the embossed surface gives the banding its final sheen, which helps the edge match the intended decor level without extra finishing steps on site.
Rehau PVC edgebanding 301799-190, classified as edge banding in the edgebanding category, is set up for use on panel edges in woodworking applications where a PVC edge is specified. The 15/16 inch width suits cabinet components built from nominal 3/4 inch sheet goods, giving shops a straightforward match between board thickness and banding coverage. As a PVC edge banding product from Rehau, Inc., it fits workflows that already use Rehau decorative programs, because the CP40827 designation ties this banding to a specific decor reference. The 600 ft length referenced in the product description supports runs of multiple cabinets, doors, or shelves in a single reel, which is useful for production shops or larger projects using the same finish.
The 1mm thickness of Rehau PVC edgebanding 301799-190 gives enough material for trimming while staying within common edgebander and trimmer settings, which supports repeatable setup from job to job. The embossed CP40827 surface works with the lacquer layer to control both feel and appearance, which helps keep edges on doors, drawer fronts, and panels visually aligned with the chosen decor. Because the banding is PVC edge banding made by Rehau, Inc., shops can reference the manufacturer part number 301799-190 when matching existing installations that already use this edge. The 600 ft length on this CP40827 embossed lacquered roll lets production lines run more parts between coil changes, which reduces interruptions and helps maintain a steady rhythm on edgebanders during cabinet batches.
Rehau PVC edgebanding 301799-190 is described as 15/16 inch wide by 1mm thick, which suits edging work on nominal 3/4 inch panels with enough overhang for trimming.
Rehau PVC edgebanding 301799-190 uses a CP40827 embossed lacquered finish, which adds surface texture and sheen control so edges visually coordinate with the matching decor.
Rehau PVC edgebanding 301799-190 is listed as 600 ft, which supports longer cabinet or furniture production runs before coil changeover on the edgebander.
Rehau 301799-190 is categorized as edge banding under edgebanding, so it is intended for covering and finishing the edges of panels and components.
Rehau PVC edgebanding 301799-190 is manufactured by Rehau, Inc., which helps shops standardize on a specific maker for decor and performance consistency.
Rehau PVC edgebanding 301799-190 at 1mm thick offers a defined edge that trims cleanly with common tools, giving panels a more solid-feeling perimeter.
Rehau PVC edgebanding 301799-190 combines a 15/16 inch by 1mm PVC profile, CP40827 embossed lacquered decor, and a 600 ft length, giving cabinet and woodworking shops a defined, repeatable edge treatment. For projects using this specific Rehau decor, choosing this part number aligns edge appearance, coil length, and machining behavior with the requirements of production edgebanding work.
Sold In: 1 Roll