Rehau PVC edgebanding 301799-195 15/16 in x 1mm

Rehau PVC Edgebanding 301799-195 For Clean Edges

Rehau PVC edgebanding 301799-195 is a PVC edge banding designed to finish exposed board edges, so cabinet and furniture projects present a clean, uniform edge instead of raw core. The 15/16 inch width covers standard board thickness with room for trimming, helping installers hide minor alignment variation while still delivering a straight finished line. The 1mm thickness gives the banding enough body for a solid edge profile, which supports precise trimming and reduces the risk of chatter during flush routing. The CP20956 reference identifies a specific decor match, allowing shops to align this banding with the intended panel design across multiple components. An embossed lacquer surface adds a textured, finished look on the edge, which lets the profile visually blend with structured or coated faces in the overall assembly. The 600 ft length supports longer runs or repeated jobs from a single reel, reducing changeovers in the shop.

Key Edgebanding Details That Support Shop Work

• The Rehau, Inc. brand on this PVC edgebanding ties directly to an established edgebanding manufacturer, which helps shops maintain consistent edge appearance when repeating jobs or matching existing Rehau projects.
• The 15/16 inch width on this edge banding gives coverage beyond common panel thickness, which provides trimming margin so installers can route or scrape back to a precise, chip-free edge line.
• The 1mm thickness on the Rehau 301799-195 profile creates a sturdy edge layer, which supports clean profiling, better corner definition, and a more substantial feel on cabinet doors, drawer fronts, and casework.
• The CP20956 embossed lacquer surface on this PVC edgebanding delivers a decor-specific, textured finish, which helps the edge visually coordinate with panels or fronts using the same design reference in a project.
• The 600 ft length stated for this Rehau PVC edge banding gives shops and installers extended run capacity, which limits mid-job roll changes and supports efficient production on repeated or large orders.

Edgebanding Size And Finish For Practical Installation

This Rehau PVC edge banding combines a 15/16 inch width with 1mm thickness, giving installers a workable balance between trimming allowance and edge strength during application. The extra width beyond typical panel sizes leaves margin for standard edgebanding workflows, where the band is applied slightly proud and then trimmed flush. The 1mm profile supports these trimming steps without feeling flimsy, which helps routing, scraping, and end finishing stay predictable from part to part. The CP20956 embossed lacquer designation defines the surface look, so production teams can tie this edge directly to matching faces in a program. Because the material is PVC edgebanding, it is suited to standard edge banding processes used in cabinet and furniture shops handling similar PVC-based products.

How This Rehau PVC Edgebanding Fits Shop Use

Where Rehau 301799-195 Edgebanding Is Applied

This Rehau PVC edgebanding 301799-195 is identified as edge banding, so its role is finishing exposed edges on panels, doors, and similar components in woodworking and cabinet projects. The 15/16 inch width means it is sized for edges on typical board dimensions, providing coverage for substrates used in many cabinet and furniture builds. Because it is PVC edgebanding, it belongs in workflows where synthetic edge materials are standard, such as production cabinet lines, commercial casework, or shop-built furniture using laminated or coated panels. The CP20956 decor code links the edge banding to a particular visual design, so it fits best wherever that specific decor is used across fronts, shelves, or carcass parts on the job.

Why Size, Thickness, And Surface Support Results

The 1mm thickness of this Rehau 301799-195 edge banding gives installers a firm but workable edge layer, which supports smooth trimming passes and consistent profiling across multiple parts. That thickness also helps the edge stand up visually against panel faces, so the transition from face to edge looks deliberate instead of fragile. The 15/16 inch dimension leaves enough overhang when centered on a typical board, so trimming tools can remove material without exposing core or decor mismatch at the corner. The CP20956 embossed lacquer surface adds texture and sheen control to the edge, which matters when aligning the profile with structured or lacquer-look faces in the same job. Together, these verified details let shops dial in repeatable edges on cabinet runs or custom pieces using this specific Rehau PVC edgebanding.

Common Questions About Rehau PVC Edgebanding 301799-195

Select Rehau 301799-195 For Matching PVC Edges

Rehau PVC edgebanding 301799-195 combines a 15/16 inch width, 1mm thickness, and CP20956 embossed lacquer surface to support matched, finished edges on cabinet and furniture components. The 600 ft length helps production shops and serious DIY users handle multiple parts or full runs with the same decor reference. For projects built around the CP20956 design, this Rehau edge banding lets edges track the same look across doors, shelves, and carcass parts, keeping finished pieces consistent from one component to the next.