Rehau PVC edgebanding is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges, giving casework and cabinetry a consistent, workable edge profile. The 15/16 inch width provides coverage for standard panel thicknesses with a bit of overhang, which allows trimming to a flush, clean line after bonding. The 1mm thickness creates a substantial edge detail that stands up well compared with thinner tapes, supporting dependable handling during machining. The CP60532 designation identifies a specific finish and texture, so multiple components in the same project can share a uniform edge appearance. The embossed lacquer surface gives the banded edge a defined texture and sealed finish, which supports a more refined look at eye-level cabinet and furniture edges. With the 301799-198 part number, shops can reorder the same material across jobs without re-matching colors or finishes.
This Rehau PVC edgebanding uses a 15/16 inch width so the edge extends slightly beyond both faces of standard panels, which helps edgebanders and trimmers cut back to a crisp flush edge. The 1mm thickness provides a defined profile at the panel edge, giving installers enough material to mill cleanly without tearing or chipping typical engineered substrates. Because it is PVC edge banding, it responds predictably under common woodworking tools designed for plastic edgebands, which supports repeatable results on straight runs and cabinet components. The combination of width and thickness helps shops maintain consistent reveal and feel across doors, tops, and case edges using this same product.
This Rehau PVC edgebanding, identified as 301799-198, fits cabinet, furniture, and panel projects that call for a 15/16 inch wide edge treatment on engineered boards. The edge banding format suits straight panel edges on case sides, shelves, and vertical partitions, where a continuous PVC strip is required along the length. The 1mm thickness works well for cabinet components that benefit from a slightly heavier edge, supporting a more solid feel at hand-contact areas. Because it is categorized as edge banding in the edgebanding class, it aligns with standard woodworking workflows that use edgebanders, trimmers, and flush routing to finish raw board edges consistently.
The specified 15/16 inch by 1mm size lets shops set up machines around a known width and thickness, which reduces adjustment time between batches using this same Rehau PVC edgebanding. The CP60532 embossed lacquer finish provides a defined surface character, so multiple cabinet parts finished with this product share the same texture and sheen from run to run. Having a dedicated manufacturer part number, 301799-198, means purchasing and production can call out the exact edge banding required, which supports consistent results across large or repeat projects. As a PVC edge banding from Rehau, Inc., it slots directly into processes already tuned for PVC edgebands, helping maintain predictable trimming, scraping, and finishing behavior on cabinet and panel edges.
The Rehau PVC edgebanding 301799-198 is specified as 15/16 inch wide by 1mm thick, giving coverage with trim allowance and a solid edge profile on cabinet and panel components.
The CP60532 embossed lacquer designation refers to a particular textured and lacquered surface on this PVC edge banding, helping match the specified look across coordinated parts.
This Rehau edge banding is PVC, so it is a plastic edgebanding suitable for machining and trimming with tools set up for PVC edges in woodworking shops.
The 1mm thickness provides a more pronounced edge than thin tape, supporting clearer profiles and dependable trimming on cabinet doors, shelves, and case parts.
The 301799-198 part number uniquely identifies this width, thickness, and finish combination, so repeat orders match previous projects without reselecting specifications.
The 15/16 inch width extends beyond both faces of typical panels, giving room for flush trimming and creating straight, aligned edges along cabinet components.
The Rehau PVC edgebanding 301799-198 combines a 15/16 inch width, 1mm thickness, and CP60532 embossed lacquer finish to deliver a repeatable edge solution for cabinet and panel projects. Using this defined size and surface specification lets shops standardize edgebanding setups across runs, simplifying both purchasing and production. For work that depends on consistent panel edges and matched finishes, this Rehau edge banding provides a clearly identified option ready to integrate into established woodworking processes.
Sold In: 1 Roll