Rehau PVC edgebanding 301799-207 15/16 x 1mm

Rehau PVC Edgebanding 301799-207 For Clean Edges

Rehau PVC edgebanding 301799-207 is a PVC edge banding designed to finish exposed panel edges, so cabinet and furniture parts present a clean, professional boundary instead of a raw substrate. The 15/16 x 1mm dimension means this strip covers standard panel thicknesses with a bit of overhang, giving room to trim flush for a tight, consistent edge. The CP41408 reference ties this edgeband to a specific decor match, which matters when aligning edges with coordinating surfaces across a run of parts. The embossed lacquer finish noted in the description identifies a textured, coated surface, helping the banding visually integrate with decorative laminates in the same family. A 600FT length is suited to production runs or larger projects, reducing roll changes so edge work stays continuous from part to part.

Key Rehau PVC Edge Banding Advantages On The Bench

• The Rehau, Inc. brand designation identifies a dedicated edge banding manufacturer, which supports consistent sizing and finish from roll to roll when running multiple jobs with the same part.
• The 15/16 inch width provides coverage beyond common panel thicknesses, giving room to trim both sides and dial in a clean, centered edge without exposing the core.
• The 1mm thickness offers a defined edge profile compared to ultra-thin tape, which helps create a more substantial look along cabinet doors, drawer fronts, and shelving.
• The CP41408 decor code connects this PVC edgebanding to a specific surface design, which is important when edges need to visually align with matching board or laminate patterns.
• The embossed lacquer description points to a textured, coated surface treatment, which helps the edge visually coordinate with similarly finished decorative faces in a project.
• The 600FT length supports longer production runs or multiple smaller jobs from a single roll, which helps keep edge appearance uniform across many components.

Edgebanding Dimensions That Support Straightforward Application

The 15/16 inch width on this Rehau PVC edge banding gives extra coverage beyond standard panel thickness, so installers can align the band slightly proud and trim back to a flush, clean line without risking core exposure. The 1mm thickness provides a moderate edge build, which is helpful when a visible, defined edge is desired rather than a thin, nearly invisible strip. Because the product is defined simply as PVC edgebanding, it fits into typical edge banding workflows wherever PVC strips are specified in shop drawings. The consistent sizing helps maintain even reveal around door and panel perimeters when the material is applied and trimmed across an entire batch of parts.

Using Rehau 301799-207 Edgebanding In Woodworking

Where This PVC Edgebanding Fits Wood Projects

This Rehau PVC edgebanding, listed in the Edgebanding category and Edge Banding product class, is suited to jobs where exposed panel edges need to be finished to match decorative surfaces. The 15/16 x 1mm format works on many cabinet and casework components, giving panel edges a defined boundary that ties into CP41408 decor surfaces. The embossed lacquer characteristic supports use wherever a textured, coated appearance is part of the design language, so doors, drawer fronts, and carcass edges can visually relate to matching faces. The 600FT length is practical for cabinet shops and woodworking operations that process multiple components in the same finish, so large projects can pull from a single part number.

Why These Edge Details Matter For Consistent Results

The 15/16 inch width creates trimming margin on both sides of standard thickness panels, which helps installers achieve a straight, centered edge without chasing slight panel variations from sheet to sheet. The 1mm thickness provides an edge that is noticeable enough to define the perimeter yet still proportional to typical cabinet parts, supporting a balanced appearance on doors and shelves. The CP41408 code and embossed lacquer description anchor the edgebanding to a specific visual style, which matters when repeat projects or replacements must maintain the same look over time. The defined manufacturer part number 301799-207 allows shops to specify and reorder the identical PVC edgebanding, so future runs align with previous work in color, texture, and edge feel.

Common Questions About Rehau PVC Edgebanding 301799-207

Select Rehau PVC Edgebanding 301799-207 For Matched Edges

This Rehau PVC edgebanding 301799-207 combines a 15/16 x 1mm size, CP41408 decor reference, and embossed lacquer character to support clean, coordinated panel edges. For projects calling for this specific edge detail, choose this part number to align future components with existing work.