Rehau PVC edgebanding 301799-219 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges on cabinetry and casework, giving a clean finished line along exposed sides. The SAP description 15/16X1MM CP20978 EMB LAC 600FT identifies a 15/16 inch wide, 1mm thick band, which matches common 3/4 inch board applications while leaving a slight overhang for trimming to a precise edge. The CP20978 EMB LAC reference ties this banding to a specific embossed and lacquered design, so installed runs can visually match that CP20978 surface pattern and sheen. The 600FT length in the description indicates a long run of material, which supports extended production or multiple jobs without frequent changeovers during edging work.
The SAP description 15/16X1MM CP20978 EMB LAC 600FT specifies a 15/16 inch wide edgeband, giving a slight overbuild past typical panel thickness that supports straight trimming passes along cabinet sides and tops. The same description calls out 1mm thickness, so the installer works with a sturdier edge material that can handle trimming operations while maintaining a defined profile on the finished edge. The CP20978 EMB LAC reference signals an embossed and lacquered design, which means edges can visually coordinate with CP20978 surfaces when installed across doors, drawer fronts, and panels in the same project.
The product class Edge Banding identifies Rehau PVC edgebanding 301799-219 as material specifically intended for covering exposed panel edges in woodworking and cabinet work. The 15/16X1MM dimension from the SAP description aligns well with edging tasks on cabinetry built from panels around 3/4 inch thick, giving enough width to fully cover the substrate while leaving a small margin for trimming. The CP20978 EMB LAC design reference allows the edgebanding to support projects that use the same CP20978 look on faces, since matching edges help panels, doors, and drawer fronts read as a unified surface. The 600FT length supports shop environments that process multiple cabinets or case goods in sequence, helping maintain visual continuity of CP20978 EMB LAC edging across a full installation.
The manufacturer part number 301799-219 clearly identifies this exact Rehau PVC edgebanding, which matters when repeating a job or ordering for field touch-up because matching that part retains the same width, thickness, and CP20978 EMB LAC finish. The 1mm thickness noted in the 15/16X1MM CP20978 EMB LAC 600FT description provides a workable balance between a solid profile and manageable trimming, so edges can be processed on typical edgebanding and trimming equipment while maintaining a defined edge line. The 15/16 inch width supports consistent trimming passes along both long cabinet edges and shorter shelf pieces, letting installers keep the same band across various components in a job. The long 600FT run also supports repetitive production setups, because the same band can serve carcasses, doors, and filler pieces without changing material, helping finished runs share the same CP20978 EMB LAC appearance.
Rehau PVC edgebanding 301799-219 uses a 15/16 inch width and 1mm thickness, giving full coverage on typical panel edges with enough material for trimming to a clean, straight profile.
Rehau PVC edgebanding 301799-219 uses the CP20978 EMB LAC design reference, so the embossed and lacquered look can visually coordinate with CP20978 surfaces across doors and panels.
Rehau PVC edgebanding 301799-219 at 1mm thickness offers a more substantial edge than thin tape, supporting trimming operations while leaving a defined edge profile on cabinet components.
Rehau PVC edgebanding 301799-219 in a 600FT length supports longer production runs, allowing multiple cabinets or casework pieces to use the same continuous CP20978 EMB LAC edging.
Rehau PVC edgebanding 301799-219 uses a specific manufacturer part number, which helps repeat projects keep matching width, thickness, and CP20978 EMB LAC finish.
Rehau PVC edgebanding 301799-219 at 15/16 inch width works well with panels around 3/4 inch thick, leaving a slight overhang for trimming to a flush cabinet edge.
Rehau PVC edgebanding 301799-219 combines a 15/16 inch width, 1mm thickness, and CP20978 EMB LAC design to support clean, coordinated cabinet and casework edges. The dedicated manufacturer part number and 600FT length back repeatable work across full projects. Selecting this Rehau edge banding ties visible panel edges to the CP20978 look, helping doors, drawer fronts, and cabinet carcasses present a consistent finished appearance from run to run.
Sold In: 1 Roll