Rehau PVC edgebanding 301799-232 gives you a dedicated edge banding solution in the Rehau, Inc. line, so cabinet and furniture projects get a consistent finished edge along exposed panel sides. This PVC edgebanding is built as part of Rehau's edge banding range, which keeps your material choice aligned with common shop standards when working with engineered panels. The product is defined as edge banding in the edgebanding category, so it is meant to finish raw board edges rather than acting as structural trim. With a manufacturer part number 301799-232, it ties directly to Rehau's catalog for easy re-ordering when a job repeats. Using a repeatable, cataloged part number also supports matching multiple runs on larger projects where the same edge detail needs to carry through.
This Rehau PVC edgebanding, defined as 15/16 x 1mm in the SAP description, gives installers a known width and thickness to set up trimmers, so flush cutting and scraping steps can be dialed into a repeatable process. The 15/16 inch width gives working tolerance beyond a typical 3/4 inch board, which supports clean trimming on both faces without exposing core material. With a 1mm PVC body, the edge stands up well to common trimming equipment, helping keep cut quality consistent across long runs. The EMB and LAC notes tell you that the surface is both embossed and lacquer-finished, so installed edges present a textured, finished look that pairs well with decorative boards in cabinet and furniture projects.
This Rehau PVC edgebanding 301799-232 is categorized as edge banding, so its role on the job is to finish exposed panel edges on cabinets, furniture, or similar casework. The 15/16 inch width stated in the SAP description is sized to cover common panel thicknesses with a small margin, which helps you align the tape without having to ride the edge exactly during application. That extra width is trimmed back after bonding, so the finished edge sits flush with the face and back of the panel. The 1mm thickness creates a defined PVC edge that reads as a solid strip rather than a thin skin, which supports a more substantial feel on cabinet doors and drawer fronts. Because the product is PVC edgebanding from Rehau, Inc., it integrates into workflows that are already set up for PVC banding, so heating, trimming, and finishing steps stay familiar to shop crews.
The manufacturer part number 301799-232 ties this edgebanding directly to Rehau's system, so when a specification calls out that number, you can match the exact 15/16 x 1mm PVC profile described in the SAP text. The CP60592 reference in the description further narrows it to a particular Rehau design line, which matters when you want edge details to coordinate visually with other components referencing the same code. The EMB notation indicates an embossed surface, giving the banding a textured face that holds its look along the length of a run, which is useful on cabinet rows where edges sit at eye level. The LAC detail denotes a lacquer-style finish, so once applied and trimmed, the edge carries a finished appearance without additional surface work. With a length identified as 600FT, one supply source covers extended production runs, which helps maintain consistent appearance and setup across multiple cabinets or rooms.
Rehau 301799-232 is PVC edgebanding from Rehau, Inc., so it is used to finish exposed panel edges on cabinets, furniture, and other casework built with sheet goods.
The SAP description states 15/16 x 1mm, so the banding is 15/16 inch wide and 1mm thick, giving coverage over typical 3/4 inch panels with trim allowance.
CP60592 in the description identifies a specific Rehau design reference, so projects that call out CP60592 can be matched to this exact edgebanding variant.
The EMB and LAC notes indicate an embossed, lacquer-style surface, giving the edge a textured, finished appearance that aligns with decorative panel faces.
The 600FT measure provides a long continuous supply, helping shops run multiple cabinets or larger projects while keeping edge appearance and setup consistent.
The 1mm PVC thickness offers a solid edge profile that works well with standard trimmers, helping maintain a clean, defined edge after flush cutting and scraping.
Rehau PVC edgebanding 301799-232, defined in the SAP description as 15/16 x 1mm CP60592 EMB LAC 600FT, ties width, thickness, surface texture, finish, and length together in one part number so shops can standardize edge details. Using this Rehau edge banding on cabinet and furniture projects keeps exposed panel edges finished with a consistent embossed lacquer look from run to run. For work that specifies this exact Rehau reference, choosing this edgebanding keeps your edge appearance aligned with the intended design.
Sold In: 1 Roll