Rehau PVC edgebanding 301799-237 is a PVC edge banding product that finishes exposed panel edges on woodworking projects, so cabinet and furniture components present a clean, professional edge instead of raw core material. The 15/16 inch width stated as 15/16X1MM CP41462 EMB LAC 600FT gives coverage across typical 3/4 inch panels with margin for trimming, which helps installers achieve a flush edge after routing or knife-trimming. The 1mm thickness noted in the description provides a defined edge profile, giving panels a solid, substantial look in completed work. The CP41462 EMB LAC designation identifies a specific embossed and lacquered finish style, so runs using this edgebanding maintain a consistent visual appearance across multiple parts. The 600FT length referenced in the SAP description supplies extended footage in one continuous product, which reduces changeovers during larger cabinet or fixture projects.
The 15/16X1MM CP41462 EMB LAC 600FT designation shows this Rehau, Inc. edgebanding as 15/16 inch wide and 1mm thick, giving installers a clear starting point for setting up edge banders or manual trimmers. The width allows edge banding operations to reference from the panel face while leaving manageable overhang, so trimming steps remain controlled and efficient. The 1mm thickness gives equipment a consistent material feed, supporting repeatable settings across multiple pieces. The continuous 600FT format keeps the same CP41462 EMB LAC appearance running through larger batches, which supports consistent results on full kitchen, closet, or commercial casework runs.
The SAP description 15/16X1MM CP41462 EMB LAC 600FT places this product squarely in edge banding work on flat panel components, so it suits cabinet sides, shelves, tops, and doors that expose core material at the edge. The 15/16 inch coverage works well when banding panels produced for standard carcass construction, helping operators avoid narrow misses where substrate might otherwise show. The 1mm thickness interacts predictably with trimming tools, allowing a single setup to carry through a run of cabinet parts. Because the material is described specifically as PVC edgebanding, it supports edge finishing tasks where a synthetic band is preferred over other edge treatments. The Rehau, Inc. branding ties this edgebanding to a recognized manufacturer in the edge banding category, which matters when shops standardize on specific profiles and finishes for repeat jobs and reorders.
The manufacturer part number 301799-237 and CP41462 EMB LAC identifier together define an exact finish reference, allowing shops to maintain visual continuity on projects that repeat this specification over time. When the same PVC edgebanding 301799-237 is used across multiple production runs, replacement doors or panels can match the original edges more closely, which supports service work and expansions. The 600FT length aligns with extended banding operations, so edge banders can process long cabinet or fixture sequences with fewer material changes, reducing stops during production. The 1mm thickness and PVC construction combine to create a consistent edge profile, helping assembled cabinets align cleanly where doors, drawer fronts, and carcass edges meet. As an edge banding product in the Miscellaneous|Edgebanding category, it fits into established shop processes that rely on defined widths, thicknesses, and finishes to keep panel work uniform from part to part.
Rehau 301799-237 is a PVC edgebanding product, so it is used to cover and finish exposed panel edges on cabinetry, furniture, and other flat panel woodworking projects.
This PVC edgebanding is described as 15/16X1MM, meaning it is 15/16 inch wide, which gives coverage across typical 3/4 inch panels with extra width for trimming after application.
The 1mm thickness specified in the SAP description provides a defined edge profile, so trimmed edges feel substantial and give doors and panels a solid-looking border in finished installations.
The CP41462 EMB LAC reference identifies a specific embossed and lacquered finish style, helping shops repeat the same visual appearance across multiple components and project phases.
The 600FT length in the SAP description provides extended continuous material, which supports long banding runs on cabinet or casework projects with fewer material changes during processing.
This PVC edgebanding, under part number 301799-237, is manufactured by Rehau, Inc., placing it within Rehau's line of edge banding products for woodworking applications.
The 15/16X1MM CP41462 EMB LAC 600FT description of Rehau PVC edgebanding 301799-237 gives shops a clearly specified edge banding choice for panel work. The defined width, 1mm thickness, PVC material, and named finish help cabinet and millwork operations align tooling, match projects, and keep exposed edges looking consistent from part to part.
Sold In: 1 Roll