Rehau PVC edgebanding 301799-241 is a PVC edge banding from Rehau, Inc. that covers raw board edges so panels present a finished, uniform edge in cabinet and furniture projects. The SAP description lists a 15/16 inch width, so the banding spans standard 3/4 inch panels and slight overhang, giving room to trim flush without exposing the core. The 1mm thickness noted in the description provides a solid edge profile that handles normal shop handling while allowing clean trimming and scraping. The CP41466 reference in the description identifies a specific design match, helping align this strip with coordinated surfaces in larger jobs. The description also calls out an embossed lacquer surface, so the face is textured and coated, which supports a consistent visual appearance across multiple pieces.
The 15/16 inch width called out in the SAP description lets installers center the Rehau PVC edgebanding over common panel thicknesses and still have material to trim, which supports accurate flush-trim passes along the entire edge. The 1mm thickness gives enough material for routing and scraping tools to register without tearing at the edge, which matters when working long cabinet sides or tall partitions. Because this is PVC edgebanding, it is suited to typical edge-banding workflows using appropriate equipment for applying and trimming PVC edges in shop environments.
This Rehau PVC edgebanding, identified by manufacturer part number 301799-241, sits in the Edge Banding product class, so it is intended for finishing exposed edges on panel-based components. The 15/16 inch width and 1mm thickness specified in the SAP description align with common cabinet, closet, and furniture panels, supporting use on doors, drawer fronts, ends, and shelving. The CP41466 designation gives this banding a defined design identity, which supports projects where edges need to match a specific surface program or laminate. Because the description references an embossed lacquer surface, the banding provides a textured and coated edge that visually complements decorative faces in casework applications.
The combination of 15/16 inch width and 1mm thickness described for this Rehau PVC edge banding gives installers a predictable amount of material to work with, which supports repeatable trimming setups across multiple parts. Having a defined CP41466 design code lets shops standardize on this part number when they need the same edge look across new builds and future replacements, simplifying reorders and reducing mix-ups. The embossed lacquer note in the SAP description indicates a surface treatment that reads as a finished edge, helping completed cabinets and fixtures maintain a consistent appearance from panel face to edge. The 600FT length listed in the description supports longer production runs using a single part number, which helps maintain visual continuity from piece to piece.
Rehau PVC edgebanding 301799-241 has a listed width of 15/16 inch, giving coverage for standard panel thickness with extra material for trimming to a clean, flush edge.
This Rehau PVC edge banding has a 1mm thickness noted in the SAP description, providing a solid edge profile that supports clean trimming and handling on cabinetry components.
The CP41466 designation in the SAP description identifies a specific design reference, helping users match this edgeband to coordinated surface programs in cabinet and furniture projects.
The SAP description lists this PVC edgebanding as embossed lacquer, indicating a textured and coated face that presents as a finished decorative edge on panels.
The SAP description shows a length of 600FT, supporting extended runs on repetitive cabinet or panel work using the same edge profile and design.
Rehau 301799-241 from Wurth Baer Supply is a PVC edgebanding in the Edge Banding product class, used to finish exposed panel edges in woodworking applications.
The Rehau PVC edgebanding 301799-241 from Wurth Baer Supply pairs a 15/16 inch width with 1mm thickness, CP41466 design, and an embossed lacquer surface so edges align visually with coordinated panels. Using this specific part number allows shops to repeat a known edge appearance across cabinets, fixtures, or furniture runs whenever this design is required.
Sold In: 1 Roll