Rehau PVC edgebanding 301799-244 is a PVC edge banding designed to finish exposed panel edges on woodworking and cabinetry projects, so raw board edges are covered and present a uniform, professional edge. The product is classified as edge banding, which means it is intended to cap the exposed sides of panels so substrate edges stay protected in daily use. The 15/16 inch width gives coverage across standard panel thicknesses with a bit of overhang, allowing trimming back to a precise line. The 1mm thickness provides a solid band of PVC at the edge, supporting a crisp profile after trimming and flushing operations. The SAP description notes CP41464 EMB LAC, identifying a specific decorative and surface configuration so matching the corresponding board or laminate color is straightforward in shop planning.
The 15/16 inch by 1mm sizing in the SAP description defines how this Rehau PVC edgebanding sits on a panel edge, so installers know they have a strip slightly wider than typical board thickness that can be trimmed flush after bonding. The PVC construction supports standard edgebanding workflows, where the band is applied along straight or gently curved edges and then trimmed with dedicated trimmers or routing operations. The CP41464 EMB LAC code and part number 301799-244 give a clear label on shop paperwork, so the correct roll is pulled to match the specified color and configuration when edging cabinet carcasses, doors, and shelving.
The product class of edge banding and the PVC description show that this Rehau part 301799-244 is intended for closing off exposed edges on cabinetry, furniture, and other panel-based assemblies, so projects move from raw-core appearance to a finished, coordinated look. With a width of 15/16 inch, the band comfortably spans the face of common panel thicknesses used in casework, so installers can run it in a continuous pass without exposing the core at slight alignment variations. The 1mm thickness gives the edge a defined PVC face, so doors and drawer fronts gain a solid-feeling perimeter that visually ties into the chosen decorative surface identified by CP41464 EMB LAC. Because it is PVC edgebanding, it fits naturally into production woodworking environments that already handle similar banding on edgebanders or with handheld tools, so shops can integrate it into existing runs without changing their basic process.
The explicit 15/16 inch by 1mm sizing allows fabricators to set trimmers and cutters around a known overhang and material thickness, so edge cleanup becomes a repeatable operation from part to part. The defined CP41464 EMB LAC designation means that once a finish scheme is selected, this exact Rehau PVC edgebanding can be specified on drawings and job tickets, so every replacement panel or later add-on uses the same appearance and maintains continuity across an installation. The manufacturer part number 301799-244 links directly to that specification, so purchasing and production speak the same language when sourcing and staging the edgebanding roll. As edge banding, it plays the finishing role at the perimeter of the board, so once applied and trimmed, the edge line reads as a single, consistent surface that supports clean alignment between doors, drawer fronts, and adjoining panels.
Rehau 301799-244 edgebanding is specified at 15/16 inch width by 1mm thickness, so it provides slight overhang for trimming while giving a solid PVC layer at the panel edge.
Rehau 301799-244 is described as PVC edgebanding, so it uses a PVC composition suited to standard woodworking edgebanding processes on cabinetry and panel furniture.
The CP41464 EMB LAC code in the SAP description identifies the specific decorative and surface configuration, so it guides finish matching across doors, drawer fronts, and cases.
This product is classified as edge banding, so it covers raw panel edges, creating a finished perimeter that visually aligns with the chosen decorative surface.
The 1mm thickness on this Rehau PVC edgebanding allows trimming and light profiling at the edge without immediately exposing the core, supporting a clean, durable-looking line.
The 15/16 inch width provides slight overhang on typical panel edges, so installers can apply the band, then trim it flush for consistent, straight edge results.
Rehau PVC edgebanding 301799-244 combines a 15/16 inch width, 1mm thickness, and the defined CP41464 EMB LAC appearance, so it gives shops a clearly specified edge solution for cabinetry and panel projects. The combination of part number and SAP description supports straightforward ordering and repeat use on follow-up work, while the edge banding classification confirms its role as the finishing layer at the panel perimeter. Selecting this specific Rehau PVC edge banding lets fabricators line up dimensions and finish codes with their drawings, so edged components move cleanly from panel processing through installation.
Sold In: 1 Roll