Rehau PVC edgebanding 301799-246 is a PVC edge banding from Rehau, Inc. that finishes exposed board edges, giving panels a defined, uniform edge that reads as a single surface in the finished project. As part of Wurth Baer Supply's edgebanding offering, this product fits into professional woodworking workflows where consistent appearance and repeatable processing matter. The manufacturer part number 301799-246 clearly ties this edge banding to its specific color and design, so repeat jobs or field repairs can match the original installation. Identified in the SAP description as UN K64 Ombre 15/16X1MMX600', it delivers a 15/16 inch wide, 1mm thick PVC strip over a 600 foot length, providing enough material for larger cabinet, fixture, or millwork runs without frequent changeovers. This combination of defined size, material, and design helps installers plan cuts, feed setups, and yields around a known, consistent edgebanding.
The SAP description UN K64 Ombre 15/16X1MMX600' defines this Rehau PVC edgebanding as 15/16 inch wide, 1mm thick, and 600 feet long, which directly affects how it runs on edge banding machinery and how it lays out on panels. The 15/16 inch width gives coverage across common panel thicknesses with room for top and bottom trim, so installers can route or scrape back to a clean, flush edge without exposing the substrate. The 1mm thickness offers a workable balance between profile definition and machine handling, supporting smooth corner breaking and consistent scraping. With 600 feet on a coil, production teams can stage this banding on a machine and move through longer cabinet or fixture batches without frequent coil changes, keeping color and pattern continuous across the run.
The SAP description UN K64 Ombre 15/16X1MMX600' specifies a 15/16 inch by 1mm Rehau PVC edgebanding in a 600 foot length, which suits cabinet and furniture production lines that standardize around 1mm PVC. That width spans typical board thicknesses such as cabinet sides, tops, and shelves with controlled overhang, so operators can set up trimmers and scrapers once and run repeated parts with matching results. The 600 foot length plays into batching strategies, allowing a shop to edge band doors, drawer fronts, and carcass parts from the same coil, so edges across a room or bank of cabinets share the same appearance. Because this product is categorized by Wurth Baer Supply as edgebanding in their woodworking-focused assortment, it aligns with applications where finished panel edges are exposed in cabinetry, casework, or millwork.
The manufacturer part number 301799-246 gives installers and shops a precise identifier when specifying or reordering this Rehau PVC edgebanding, which supports consistent color and style across multiple phases of a project. When drawings or cut lists call out 301799-246, purchasing can match that number directly to Wurth Baer Supply's listing, avoiding substitutions that might shift edge appearance from one area to another. The combination of PVC material, 1mm thickness, and 15/16 inch width means machinery settings, glue application, and trimming sequences can be standardized around this profile and reused on future jobs calling for the same part number. Tying the web description WBSC - 1432 - /RU301799-246 back to the same item also helps internal tracking in shops that reference both manufacturer and distributor identifiers during estimating, ordering, and production planning.
Rehau PVC edgebanding 301799-246 is defined in the SAP description as 15/16 inch wide, 1mm thick, and 600 feet long, which sets up coverage, trim allowance, and run length for production planning.
The 1mm thickness specified for this PVC edge banding provides a substantial edge that responds well to trimming, scraping, and light profiling, supporting clean, consistent edges on cabinetry parts.
The 15/16 inch width called out in UN K64 Ombre 15/16X1MMX600' covers common panel thicknesses with overhang, allowing flush trimming without exposing the substrate on cabinet and furniture components.
The manufacturer part number 301799-246 uniquely identifies this specific Rehau PVC edgebanding, helping shops match color and design when reordering or coordinating across multiple project phases.
The 600 foot length described in UN K64 Ombre 15/16X1MMX600' supports longer uninterrupted production runs, so cabinets, doors, and panels can be processed with consistent edge appearance from a single coil.
The product is listed by Wurth Baer Supply under the edgebanding category, placing it within their woodworking-focused selection for finishing exposed panel edges.
Rehau PVC edgebanding 301799-246, defined as UN K64 Ombre 15/16X1MMX600', offers a specific combination of material, width, thickness, and length that supports organized cabinet and fixture production. With a clear manufacturer part number and category placement as edgebanding at Wurth Baer Supply, it aligns well with workflows that rely on repeatable edge details and consistent visual results. For shops standardizing on 1mm PVC edge banding dimensions, this product provides a defined option for planning runs, setting machine parameters, and matching prior work when the same identifier appears on drawings or orders.
Sold In: 1 Roll