Rehau PVC edgebanding 301799-247 is a PVC edge banding product designed to finish exposed panel edges in woodworking projects. The 15/16 inch width covers standard panel thickness with a bit of overhang, which supports trimming flush to the surface for a tight visual line. The 1mm thickness gives the edge a defined profile, which helps panels feel more substantial at doors, drawer fronts, and shelves. The CP41356 reference identifies the specific décor and surface, which helps align this edgeband with matching panel stock on recurring jobs. An embossed lacquer finish noted as EMB LAC adds surface texture and sheen control, which helps the edge read closer to a finished panel face under normal lighting. The 600 foot length designation provides extended run capacity from a single coil, which suits shop production or multiple projects using the same finish.
This Rehau PVC edgebanding is classified at 15/16 inch by 1mm, which positions it well for edging common panel constructions while still leaving workable trimming allowance. The PVC edge banding material responds well to standard edge banding equipment, which supports consistent bonding and trimming steps in a typical woodworking shop process. The embossed lacquer finish is engineered onto the PVC surface, which keeps the working thickness stable while still presenting a textured, lacquered look during final inspection. The 600 foot designation in the SAP description reflects a production-length coil, which favors continuous feeding on edgebanders during cabinet or fixture runs. The manufacturer part number 301799-247 ties back to this exact combination of dimensions, décor CP41356, embossed lacquer finish, and coil length, which simplifies reordering when a project specification calls for the same edging.
This edge banding is categorized by Wurth Baer Supply under Miscellaneous and Edgebanding, which situates it within typical cabinet, furniture, and general woodworking applications that require finished panel edges. The 15/16 inch nominal width suits edges on panels built from sheet goods where the face thickness aligns closely with standard casework dimensions, which lets fabricators run a single size across doors, drawer fronts, and carcass components. The 1mm thickness lends itself to visible, defined edges on cabinet runs, which is often selected where a thin yet tangible PVC edge is desired instead of ultra-thin tape. The PVC material described as edge banding provides a manufactured surface around the panel perimeter, which helps shield the underlying core from direct handling at fronts.
The CP41356 décor code noted in the SAP description ties this strip to a specific surface appearance, which matters when aligning with coordinated panels or previously installed components. The embossed lacquer finish identified as EMB LAC introduces a textured, lacquer-like surface treatment on the PVC, which helps the edge present more like a finished furniture surface than a flat plastic strip. The Rehau, Inc. branding establishes the manufacturer identity for this PVC edgebanding, which aids shops that standardize on particular lines for predictable performance across multiple jobs.
The 15/16 inch by 1mm SAP description provides a clear dimensional target, which allows shops to set up edgebanders, trimmers, and flush routing steps around a consistent overhang and thickness. That stable dimensioning supports repeatable results from part to part, which is valuable when door and drawer faces must align visually along long cabinet runs. The embossed lacquer notation communicates that the surface has both texture and a lacquer treatment, which helps the edge handle light reflection more like a finished panel face in kitchen, office, or casework environments.
The 600 foot coil length specified in the SAP description means the product is presented for extended runs, which supports uninterrupted edging of multiple components before coil changeover. This length is particularly useful when a single décor such as CP41356 repeats across a full room or bank of cabinets, which reduces workflow interruptions. The manufacturer part number 301799-247 and the web description WBSC - 1432 - RU301799-247 both reference the same item, which aids procurement and production in tying purchase records, job tickets, and shop labeling back to this exact edgebanding configuration.
Rehau PVC edgebanding 301799-247 is identified as 15/16 inch by 1mm, which sets it up for covering standard panel edges while leaving a manageable amount for trimming to a clean line.
The CP41356 reference in the SAP description identifies the specific décor of this PVC edgebanding, which helps align the edging visually with matching or coordinated panel finishes on projects.
The EMB LAC designation signifies an embossed lacquer surface on the PVC, which adds texture and a lacquer-like look so the edge reads closer to a finished furniture surface.
The 600 foot length noted in the description provides substantial run capacity, which supports continuous edging of multiple components or projects without frequent coil changeover.
This product is categorized as edge banding under Miscellaneous and Edgebanding, which suits cabinet, furniture, and general woodworking projects requiring finished edges on panel components.
PVC edgebanding 301799-247 is manufactured by Rehau, Inc., which identifies the source brand for shops that track materials by manufacturer across multiple builds.
This Rehau PVC edgebanding 301799-247 combines 15/16 inch by 1mm sizing, CP41356 décor, and an EMB LAC embossed lacquer finish, which positions it for projects where edge appearance must track closely with coordinated panels. The 600 foot coil length supports efficient production on cabinet, furniture, or general woodworking runs that repeat the same finish. When a specification or past job record calls out 301799-247, selecting this exact edge banding keeps décor, dimension, and surface treatment aligned from order through final installation.
Sold In: 1 Roll