Rehau PVC edgebanding 301799-254 is a PVC edge banding designed to finish exposed panel edges, so cabinet and furniture projects gain a consistent, protected edge. The SAP description states 15/16 x 1mm dimensions, which fit typical 3/4 inch panels while giving slight overhang for trimming, helping installers create a flush, professional edge. The description also specifies CP41053 EMB LAC, identifying a particular embossed, lacquered design reference that supports visual matching across a job. The 600FT length identified in the SAP description provides a continuous run suitable for larger projects or repetitive production, reducing changeovers during edgebanding operations. As an edge banding product classified under Edge Banding and Edgebanding categories, this Rehau strip is intended for finishing work on wood-based or laminate-based panel constructions in woodworking shops and cabinet production.
The SAP description specifying 15/16 x 1mm dimensions defines how this Rehau PVC edgebanding fits typical panel work. The 15/16 inch width gives extra material beyond a 3/4 inch substrate, so installers can trim both sides back to a straight, chip-free edge after bonding. The 1mm thickness provides an edge that is substantial enough to machine, supporting consistent scraping or flushing operations without breaking through. As an Edge Banding product, this strip is intended to be applied along linear panel edges, supporting standard woodworking workflows where panels are edged and then trimmed flush.
The product is explicitly identified as Rehau PVC edgebanding, which positions it for edge finishing on panel-based constructions in the woodworking industry. The category Edgebanding and Product Class Edge Banding confirm that its primary use is covering raw substrate edges on cabinets, furniture, or casework. With a width of 15/16 inch as given in the SAP description, this strip suits applications on standard 3/4 inch panels used in many cabinet and fixture builds, leaving just enough overhang for clean trimming. The 1mm thickness indicated supports machining after application, letting operators use typical edgebander trimming stations or handheld flush tools to achieve smooth transitions between face and edge. The specific designation CP41053 EMB LAC identifies a defined style reference, supporting projects where edge appearance needs to coordinate with other components ordered to the same reference.
The manufacturer part number 301799-254 ties directly to the SAP description 15/16X1MM CP41053 EMB LAC 600FT, which gives installers predictable dimensions and style for repeat orders, supporting consistency from job to job. The 600FT length provides enough edgebanding for extended runs, which supports uniform color and texture across many panels since material comes from the same roll. The Edge Banding classification clarifies that this Rehau PVC strip is intended for forming a finished edge, so it integrates naturally into standard panel-processing steps: cutting panels, applying edgebanding, then trimming. The CP41053 EMB LAC reference defines a recognizable appearance specification, which matters when matching existing work or coordinating multiple components in the same project line. Together, these defined details help shops plan material use, align edge appearance with design intent, and repeat successful setups over multiple production cycles.
Rehau 301799-254 is a PVC edge banding classified under Edge Banding and Edgebanding, so it is intended for finishing exposed edges on panel-based woodworking projects.
The 15/16 inch width and 1mm thickness described in the SAP text give slight overhang on typical 3/4 inch panels, which supports trimming back to a flush, solid-feeling finished edge.
The CP41053 EMB LAC designation in the SAP description identifies a specific embossed and lacquer-related style reference, supporting consistent edge appearance when matched with components using the same code.
The 600FT length defined in the SAP description offers extended continuous material, supporting long edgebanding runs with fewer roll changes during cabinet or furniture production.
This Rehau PVC edgebanding, at 15/16 inch width and 1mm thickness, is sized for use on typical 3/4 inch cabinet and furniture panels where a trim-to-flush workflow is used.
The Edge Banding classification confirms the product is intended as a finishing strip on panel edges, aligning it with typical woodworking edgebanding equipment and sequences.
The identified dimensions of 15/16 x 1mm, the CP41053 EMB LAC style reference, and the 600FT length together define how Rehau PVC edgebanding 301799-254 supports panel finishing work. These specifics help cabinet shops and woodworking operations plan edging around known sizing, appearance, and run length. For projects that rely on repeatable edge profiles and consistent visual match across multiple panels, this clearly defined Rehau PVC edge banding offers a documented option tied directly to manufacturer part number 301799-254.
Sold In: 1 Roll